How to Replace Mercury Tail Lights

Let Jerry pay for your car repair by saving you money on car insurance
Find insurance savings (100% Free)
No long forms · No spam · No fees
Megan Lebron
Updated on Apr 11, 2022 · 4 min read
If you want to save a little money on repairs, you can replace your
Mercury
tail lights yourself. The cost for new bulbs is pretty low, usually between $30 and $60 per light.
Functioning tail lights are essential to your safety on the road. They ensure that other drivers can see you, preventing dangerous accidents. A malfunctioning or broken light needs to be replaced quickly to keep you safe while driving—and to avoid a costly ticket.
Car insurance
comparison app
Jerry
put together this guide to help walk you through a Mercury tail light replacement, including what to consider in terms of filing an insurance claim. 
RECOMMENDED
Compare auto insurance policies
No spam or unwanted phone calls · No long forms · No fees, ever

How to replace a Mercury tail light

Cost: $30 to $60, but sometimes as high as $100
Time: 5-10 minutes
Tools needed: Phillips head screwdriver, replacement parts 
Difficulty: Easy
First, you’ll need to figure out what’s causing your Mercury tail light to quit working. Obviously, if your tail light is broken because you backed into something or got rear-ended, figuring out the problem won’t be too difficult. 
However, if you only knew your tail light was out because a law enforcement officer pulled you over, you might have to do some troubleshooting to figure out the issue.
If your brake lights are working fine and only one tail light is out, you probably just have a burnt-out bulb. However, if both tail lights are out or you notice the brake lights are affected too, you might have a fuse or wiring issue.
If you suspect a more complex wiring issue, you can always have a mechanic look your vehicle over and identify the problem for sure.
Once you’ve located the problem, check your owner’s manual to find out the specific parts you need for a replacement. Your manual should list the specific parts and part numbers for your Mercury model and model year.
The process for replacing the tail lights on any Mercury model is pretty standard, with maybe a few differences depending on the model. Here are the steps for a
Mariner
or
Villager
, but with a little tweaking they should work for any model.  
  • Disconnect the battery. When you’re working with anything that has wires, it’s a good idea to disconnect from the power source to prevent electric shock.
  • Open the trunk. Then locate the mounting screws on the tail light.
  • Unscrew the screws and pull the tail light assembly straight out.
At this point, you can disconnect the whole assembly and replace it if needed. But if you just need to replace a bulb, continue with these steps:
  • Unscrew the bulb socket. Then take out the burnt bulb and replace it with a new one.
  • Reinstall the tail light assembly and secure it with the mounting screws.
  • Test the new lights to make sure they’re functioning properly.
Key Takeaway Replacing Mercury tail lights is easy enough that you can do it yourself with the right tools and replacement parts.

Commons reasons for Mercury tail light malfunctions

In the case of an accident or collision, you’ll know why your tail light isn’t working anymore. But if your lights suddenly go dark, there could be several reasons why. Here are some common causes of malfunctioning tail lights:
  • Burnt-out bulb: If only one tail light is out, it’s most likely a burnt-out bulb.
  • Faulty wiring or fuses: If more than one light is affected, you may have a problem with wiring or a blown fuse. 
  • Corroded socket: If moisture gets into your tail light assembly, it can corrode the sockets where your bulbs are screwed in.
  • Broken control switch: If you replace your tail light assemblies and are still having issues, the problem may be with the control switch. 

Does car insurance cover broken tail lights? 

Depending on your car insurance coverage, you may be able to receive a payout for a broken Mercury tail light. However, it’s usually a better idea to skip the insurance claim altogether.
If your tail light was broken in an accident or by backing into a stationary object,
collision insurance
would cover the damages.
Comprehensive coverage
would kick in if your tail light was damaged by a natural disaster or vandalism.
One thing to remember is that before your insurance will pay for the damaged tail light, you’ll have to pay your deductible. 
The most you would pay to replace a tail light on a Mercury is $100. Compare this to the average car insurance deductible of $500, and you can see how you would end up saving money by not making an insurance claim. 
Remember that filing an insurance claim can potentially cause your premiums to go up. So filing a claim for a cheap repair you can do yourself can end up costing you quite a bit of money. 
Key Takeaway It’s more cost-effective to pay for a Mercury tail light replacement out-of-pocket than to file an insurance claim.

How to find affordable Mercury insurance

Car insurance for Mercury drivers costs an average of $1,347 a year. But depending on the model you drive, along with your driving history and other factors, you might be able to pay a lot less.
If you want to find the best deals on car insurance that fits your unique needs, download the top-rated insurance app
Jerry
. In just 45 seconds, Jerry will deliver customized quotes to your device so you can find the lowest rates on the coverage you need. 
Best of all, Jerry will walk you through the process of signing up for your new coverage and even help you find discounts you qualify for to save you even more money.
 “This app is all about savings!
Jerry
just saved me $193/month on my car insurance. They literally found me the cheapest policies out there and with better coverage! Seriously, just sit back and watch Jerry work its magic.” —Rachel B.
RECOMMENDED
Compare auto insurance policies
No spam or unwanted phone calls · No long forms · No fees, ever

FAQs

On average, the cost to replace Mercury tail lights is between $30 and $60. Some models might be a little higher, but the average isn’t above $100.
Absolutely! The process for replacing tail lights on any Mercury model is pretty standard, with only a few differences based on model or model year. Just make sure you have the right tools and replacement parts before you start.

Easiest way to compare and buy car insurance

√
No long forms
√
No spam or unwanted phone calls
√
Quotes from top insurance companies
Find insurance savings — it's 100% free