Mitsubishi Outlander Tire Pressure
A Mitsubishi Outlander’s tire pressure should be 35 psi for both the front and rear tires. Here’s how to measure it and fill up.
Written by Andrew Biro
Reviewed by Melanie Reiff
As per factory recommendations, a Mitsubishi Outlander’s tire pressure should be 35 pounds per square inch (PSI) for both the front and rear tires. However, this can vary depending on the type of tires you have, the altitude, and the temperature.
It may not seem like a big deal, but keeping your tires at the correct pressure is really important. If your Mitsubishi’s tire pressure is too low or too high, it can reduce fuel efficiency, make steering difficult, and put you at a higher risk of a blowout—all of which can result in expensive repairs.
Luckily for you,
Jerry
—the nation’s trusted broker app for car insurance
savings—has put together the following guide detailing everything you need to know about the Mitsubishi Outlander’s tire pressure. We’ll cover how to find the correct pressure for your model, how to check your tire pressure, and even provide some tips on how to reduce your Mitsubishi Outlander insurance costs
!Are you getting ripped off on your car insurance? Find out in less than two minutes.
No long forms · No spam · No fees
Find insurance savingsWhat is the right tire pressure for a Mitsubishi Outlander?
Per factory recommendations, your Mitsubishi Outlander’s front and rear tires should have a minimum tire pressure of approximately 35 psi—but this may change depending on environmental conditions (such as temperature and altitude). When in doubt, check your owner’s manual.
It’s also worth mentioning that tire pressure requirements may change if you install aftermarket tires, especially if they are larger or wider than the factory-issued tires—all the more reason to check and double-check the specific pressure recommendation for any tire you install.
Tire pressure recommendations for other Mitsubishi vehicles
Vehicle | Front tire pressure | Rear tire pressure |
|---|---|---|
Mitsubishi Outlander | 35 psi | 35 psi |
Mitsubishi ASX | 32-38 psi | 32-38 psi |
Mitsubishi Triton | 32 psi | 32 psi |
Mitsubishi Express | 45 psi | 49 psi |
Mitsubishi Pajero | 29 psi | 29-32 psi |
Mitsubishi Eclipse Cross | 36 psi | 36 psi |
How to check Mitsubishi Outlander tire pressure
On newer Mitsubishi Outlanders, you should be able to check your tire pressure via the main instrument cluster or multimedia display screen. Your vehicle’s tire pressure monitoring system will let you know if there is a pressure-related issue by switching on the low tire pressure warning light.
You can still check your Mitsubishi’s tire pressure the old-fashioned way—all you need is a little patience and a reliable tire pressure gauge. Get out your gauge or head to an air filling station. Remove the valve stem cap from each tire and insert the gauge into the valve. After a few seconds pass, the tire gauge will provide a numerical reading that you can use to add or remove air from the tire.
Your vehicle may also signal that the tire pressure is off in subtler ways, such as declining performance, a rough or uneven ride, or even sloppy steering. If you start noticing one or more of these symptoms, check your tire pressure to be safe.
How often should you check your tire pressure?
Generally speaking, experts recommend that you check your Mitsubishi’s tire pressure at least once a month. Use the same tire gauge each time to ensure consistent readings.
How to tell if your Mitsubishi Outlander needs new tires
Typically, well-kept tires won’t need to be replaced for at least 4-5 years, or roughly every 60,000 to 75,000 miles. That number ultimately depends on multiple factors, which is why it’s a good idea to regularly check your tires for abnormal or accelerated wear.
If you begin noticing odd bulges or cracks in the tire or find that the tread depth is low, it may be a good time to start looking for new tires.
One of the easiest ways to check your Mitsubishi’s tread depth is to try the penny method. Just stick a U.S. penny Lincoln’s-head first into the tread and see where the tread comes to. If you can see any part of the President’s head, your tires have worn down a lot and probably need to be replaced.
MORE: How low can your tire pressure go?
How to reset the Mitsubishi Outlander’s tire pressure monitoring system (TPMS)
Your Outlander’s TPMS light should automatically switch off after you reach the correct pressure. But if necessary, you can reset it yourself by following the steps listed below:
- Make sure the vehicle is completely parked and apply the handbrake.
- Make sure each tire is filled to the correct pressure.
- Turn your ignition to the “ON” position without actually starting the engine.
- On the control panel to the left side of your steering wheel, find and press the button with the folder icon. Keep pressing it until “SETTING MENU” appears on the instrument cluster.
- Press and hold down on the button to enter the menu.
- Use the “INFO” button to scroll through the menu until you find the TPMS reset (it’s a wheel icon with an exclamation point inside it).
- Select “RESET” and hold the button down to initiate the reset process. You’ll know it has started when a buzzer sounds and the tire pressure warning light begins to flash.
- Start your vehicle and drive for a few miles at 15+ mph until the system recalibrates and resets.
If you perform this procedure and the light stays on, take your Mitsubishi Outlander to a professional mechanic and have them diagnose the issue for you.
Let Jerry find your price in only 45 seconds
No spam · No long forms · No fees
How to save on Mitsubishi Outlander insurance
Keeping your tires properly inflated is one of the simplest ways to keep your car performing its best. In fact, routinely checking your Outlander’s tire pressure can actually reduce the chance of getting into an expensive accident and may even improve fuel efficiency.
But even the newest, best-performing cars can still get in a collision. To make sure your car is protected without overpaying for your coverage, use
Jerry
, the trustworthy brokerage app
that saves the average user over $800 a year on their car insurance payments. All you have to do is download Jerry from the App Store or Google Play, answer a few short questions about yourself and your vehicle, and in as little as 45 seconds Jerry will find you the best deals at your coverage level from top name-brand insurance providers.
“I was so intimidated about purchasing insurance for my new car. Instead of talking to agency after agency, I foundJerry, which did all the work for me. It was so user-friendly.” —Alice B.
RECOMMENDED
Jerry automatically checks if you are paying the lowest price for your insurance, for free.
Instantly compare top insurance companies
No spam or unwanted phone calls · No long forms
What insurance do you want to compare?
This app is great, but the customer service is even better! Not to mention convenient! My husband and I got the lowest rate (much lower than the rates I was finding online through my own searches), quickly, and pretty much all through text message! Thank you so much for a hassle free experience 👍
Gabriella R.
Find insurance savings
4.7/5 Rating on App Store
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
4.7You might also be interested
We value your privacy
