Subaru Outback Tire Pressure
The front tires of your Subaru Outback should be inflated to 33 psi while the rear tire pressure should be 32 psi.
Written by Pat Roache
Edited by R.E. Fulton
The recommended tire pressure for a Subaru Outback is 33 pounds per square inch (PSI) for the front tires and 32 psi for the rear tires.
What is the correct tire pressure for a Subaru Outback?
Here are the recommended tire pressures for the manufacturer wheels on a Subaru Outback:
- Front wheels: 33 PSI
- Rear wheels: 32 PSI
You can also find your tire pressure information in your owner’s manual, or listed on the sticker on your vehicle’s door frame on the driver’s side.
Keep in mind: You may need to follow different tire pressure recommendations if you’ve purchased high-performance or sport tires. Check the specifications from their manufacturer to make sure they’re properly inflated.
Let Jerry find your price in only 45 seconds
No spam · No long forms · No fees
How to check Subaru Outback tire pressure
The Subaru Outback is equipped with a tire pressure monitoring system (TPMS) that will alert you with a dashboard light if your tires are over or under inflated. Depending on your model, you may be able to scroll through the info section on your Subaru Outback to check the exact tire pressure in each wheel.
Follow these steps to check your Subaru Outback’s tire pressure manually:
- Unscrew the cap from the valve stem on the tire you want to check.
- Press a tire gauge to the valve stem to get a tire pressure rating.
What to do: If any of your Subaru Outback tires are underinflated, head to your nearest gas station to put air in immediately. Driving on underinflated tires can drastically lower your fuel economy and create unnecessary risk while driving.
How often should you check your Subaru Outback’s tire pressure?
Experts recommend checking your tire pressure at least once a month and before any major road trips. You may want to check more frequently in
colder temperatures
. How to tell if your Subaru Outback needs new tires
On average, you should replace your Subaru Outback’s tires every six years. However, you may want to replace them sooner if you notice any of the following signs:
- Cracks or bulges in the rubber
- A low tire tread
Perform the penny test: Grab a US penny and stick it in your tire tread with Abraham Lincoln pointing head first. If you can still see the top of Lincoln’s head, your tread is too shallow.
How to reset the Subaru Outback tire pressure monitoring system (TPMS) light
Your TPMS light may not always turn off on its own—even after you’ve properly inflated your Subaru Outback’s tires. Try the following steps to manually
reset the TPMS light
in your Subaru Outback:- Make sure your tires are filled to the proper PSI.
- Drive your Subaru Outback at a speed of 25 MPH or higher for several minutes.
- If the light still hasn’t turned off: Turn your Subaru’s ignition to the ON position, but don’t start the engine.
- Press and hold the TPMS reset button located under your Subaru Outback’s steering wheel.
- Let go of the button and start the car once the TPMS light starts blinking.
- Let the car run for 20 to 30 minutes to reset the light.
If neither of these options fixes the issue, you may want to take your vehicle to a mechanic or a Subaru dealership. They can diagnose the issue and get it resolved.
“I signed up for a new policy withJerry’shelp. I ended up saving $236 a month after my switch. Thank you Jerry!” —Adelaide C.
FAQs
How do you change the kPA rating in a Subaru Outback to PSI?
Your Subaru Outback may default to a kPA rating, which is what most countries outside North America use to measure tire pressure.
Use the following steps to change the kPA rating to PSI in a Subaru Outback:
- Locate the up and down I/set arrows, found in the lower-left area of your steering wheel.
- Use the arrows to navigate to the screen that says “Pull and hold I/SET switch for menu”, then pull and hold the I/Set button.
- Scroll through the menus until you find “tire pressure units”, then pull the I/Set button again
- Scroll up to “PSI” and pull the I/Set button to set your tire pressure reading to PSI.
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
4.7You might also be interested
We value your privacy
