2012 Audi Q5 2.0t Engine Oil Capacity
The 2012 Audi Q5 2.0t has an oil capacity of 4.9 quarts (4.6 liters). Here’s how to change your oil yourself.
Written by Claire Beaney
Reviewed by Rebecca Wardell
The oil capacity of the 2012 Audi Q5 2.0t is 4.9 quarts—and you can change the oil on your own in a matter of minutes! Learn the ins and outs of oil changes for your Audi Q5 here.
The 2012 Audi Q5 2.0t is the brand's smallest SUV in the United States. From exhilarating performance and a luxurious interior to practical features, you can really have it all with the 2012 Audi Q5.
The best way to save money on car maintenance and repairs is to stick to a
regular maintenance schedule
. Oil changes are at the top of the list of maintenance tasks, and you are ultimately responsible for your vehicle's performance. Here's everything you should know about your 2012 Audi Q5 2.0t’s engine oil capacity.Compare insurance quotes from 50+ insurance companies with Jerry in under 45 seconds
Compare insurance quotes from 50+ insurance companies with Jerry in under 45 seconds
4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars4.7/5 app rating | Trusted by 5M+ drivers2012 Audi Q5 engine oil capacity
Before you begin, one important question must be addressed: how much engine oil does a 2012 Audi Q5 2.0t require?
4.9 quarts of engine oil are needed for your 2.0L engine (this includes the filter).
Keep in mind that 2.0L refers to the displacement of your engine. This is not the same as your oil capacity. When you need to change your car’s oil, your Audi Q5 will require 4.9 quarts of engine oil.
What kind of oil does a 2012 Audi Q5 need?
You now know that you need 4.9 quarts of oil, but you have no idea what kind—not all motor oils are created equal! You shouldn't just pick up the oil with the best label at the store and hope for the best. You should use fully synthetic 5W-40 European motor oil, as suggested by Audi.
When it comes to the rating, it's crucial to follow the manufacturer's advice. However, as long as it is a premium-grade synthetic oil rated to 5W-40, you should be fine with any other brand.
What exactly does this rating mean? Ratings for oil indicate how thick or thin (a.k.a. viscous) it gets at different temperatures.
The "W" in the 5W-20 rating stands for winter. The 5 before the W indicates that the oil has a low viscosity at 0°F, and the 40 indicates that it is also pretty thin at 212°F. Engines benefit from low viscosity as it helps protect against wear and tear.
How often to change the oil on a 2012 Audi Q5
You're almost an expert now! Let’s put what you've learned about the oil capacity of your 2012 Audi Q5 2.0t to use—it's time to
change the oil and filter in your car
.Audi recommends changing the oil every 3,000-5,000 miles. Based on your driving habits, this should be done every six months. Don't feel obligated to take your grandma's advice about getting oil changes more regularly than necessary; synthetic oil lasts a lot longer than conventional oil.
To keep your engine running smoothly, you should always make sure to check the oil level often. Many drivers make it a habit to inspect the oil every time they fill up with gas. You want to make sure there's enough oil and that it's still of decent quality.
Here are a few indicators that you might need to change your oil:
- The color of the oil is dark (clean oil is light amber)
- Gritty or coarse oil
- Strange noises from your engine
- Burning or smoky odors
- Performance getting worse
How to change your oil and oil filter
If you're going to change the oil yourself, you'll need a few things. The following tools and materials will be required: a new filter, a socket wrench, a 14mm socket, a flathead screwdriver, an oil filter wrench, safety goggles, rubber gloves, a clean rag, an oil pan, and 4.9 quarts of 5W-40 motor oil.
Get out of the car and put on the parking brake. Start the engine and let it idle for a couple of minutes before opening the hood, then turn off the car after it reaches normal operating temperature. Open the hood of the car and perform the following steps:
- Remove the oil drain bolt and place the oil pan underneath
- Remove the oil filler cap to allow the old oil to drain
- Tighten the drain bolt to approximately 25 lb-ft of torque
- Use your flathead screwdriver on the rivets and your oil wrench to take off the old oil filter
- Before putting in the new filter, lightly coat the O-ring
- Screw it onto the engine block until it's finger-tight, then go another ⅓ of a turn
- Replace the rivets.
- Refill the oil and replace the oil filler cap
It's now time to go over your work! Start the engine and keep an eye out for leaks. After a few minutes, use your dipstick to ensure the oil level is correct. If needed, add more oil.
The final step is to properly dispose of used engine oil. Put it in a container that can't be opened until it's been delivered to a local recycling center. Used motor oil should not be discarded in the sink or the trash.
"This app is all about savings!Jerryjust saved me $193/month on my car insurance. They literally found me the cheapest policies out there and with better coverage! Seriously, just sit back and watch Jerry work its magic.” —Rachel B.
RECOMMENDED
Thousands of customers saved on average $887/year on their car insurance with Jerry
This app is great, but the customer service is even better! Not to mention convenient! My husband and I got the lowest rate (much lower than the rates I was finding online through my own searches), quickly, and pretty much all through text message! Thank you so much for a hassle free experience👍
Gabriella R.
Find insurance savings
4.7/5 Rating on App Store
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
4.7You might also be interested
.jpg&w=64&q=75){kind=avatar}
We value your privacy
