How to Remove the Back Seats from a Hyundai Veloster

You can remove the back seats from your Hyundai Veloster by taking out four bolts—but the process is a little trickier than it sounds!
Written by Joshua Levy
Reviewed by Jessica Barrett
You can remove the back row of seats from your Hyundai Veloster by unbolting or unclipping the seats. While either method should work, the clip method involves using a little more force than many car owners are comfortable with.
It’s nice to own a car that fits as many people as you want, but sometimes you need a little more space in the back. Luckily, Hyundai Veloster owners can easily remove the back row of seats to make space for cargo, luggage, and anything else you may need to haul.
To make removing your back row of seats as easy as possible, we've compiled a step-by-step guide with everything you need to know about the process. Plus, stick around for the best tips on saving on your
car insurance

Can you remove the back row of seats from a Hyundai Veloster?

If you’re struggling to fit cargo in the back of your Hyundai Veloster, don’t worry! You can remove the Hyundai Veloster’s back seats by locating and taking out a few bolts. Of course, you should always be careful when you take out the back row.
Consider these safety tips when you remove the rear seats from your Veloster:
  • Lift with your legs. The rear seats can be heavy and difficult to maneuver out of your car. To ensure you get the job done with the least amount of risk, make sure you’re lifting the bench with good form. Try not to arch your back and make sure you’re in a sturdy position before you start yanking it out.
  • Cover the brackets. Once you remove the back seats, you’ll see some metal brackets where the bench used to be. To avoid any scrapes, bruises, or damage to people and property, cover them with a blanket, towel, or tarp.
  • Keep the bolts. When you’re ready to put the bolts back in place, you’ll need to use the same bolts. Using smaller ones could lead to a shaky seat and some dangerous situations. If possible, it’s best that you put the bolts in a safe place so you can use them to reinstall your seats in the future.
Remember, if you don’t need too much extra space, you can always fold down the seats. Before you go taking out the rear bench, lay the back seats flat and see if you have enough room. Checking ahead of time could save you a whole lot of trouble in the long run.
Make safe driving pay
Get rewarded for safe driving. Earn points and unlock benefits. Totally free.
Start earning now

How to remove the second-row seats from a Hyundai Veloster

Before you start removing your car seats, you’ll need the following tools:
  • Torx bit screwdriver
  • Small bag for the bolts
Follow one of these methods to pull the back row of seats out of your Hyundai Veloster:

The bolt method

  1. Enter the car from the trunk and locate the two bolts at the bottom of your seats.
  2. Unbolt the screws using your Torx bit screwdriver.
  3. Enter the car from a side door and locate the two front bolts at the bottom of your seat.
  4. Unbolt the screws using your Torx bit screwdrivers.
  5. Slide the seat gently out of the fasteners.
  6. Pull the bench carefully out of your trunk. 
Remember to keep track of the bolts so you can safely and easily reinstall the back bench whenever you’re ready.

The clip system

While unbolting the seats should work in most models, your car may be equipped with a clip system that lets you release the seats from the brackets without unbolting them. Follow these steps to remove the back row of seats using the clip system:
  1. Lift your seats so that you can see the bottom.
  2. Locate the plastic clips underneath the seats.
  3. Press down on the plastic piece while simultaneously pulling out the metal clip.
  4. Listen for a click that indicates the seat is no longer in the brackets.
  5. Remove the seats carefully through the trunk of your car.
And just like that, you’ve taken the back row of seats out of your Veloster!
Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds
Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds
icon4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars
icon4.7/5 app rating | Trusted by 5M+ drivers

How do you put the back seats down in a Hyundai Veloster?

If you want a little extra space in the back but don’t want to remove the seats, that’s possible too! Drivers can fold down the rear bench in the Hyundai Veloster by following one of three methods. To figure out which method works for you, you’ll need to go into your car and figure out which mechanism you’re equipped with. 
For models with straps:
  1. Enter the car from the trunk.
  2. Locate the colored straps between the seats.
  3. Pull the strap behind the seat you’d like to lower.
  4. Push the seat down while pulling the strap.
For models with buttons:
  1. Enter the car from the trunk. 
  2. Locate the buttons on the shoulders of each seat.
  3. Press the button belonging to the seat you’d like to fold.
  4. Push the seat forward to lay it flat.
For models with levers:
  1. Enter the car through a side door.
  2. Locate the levers between the seats.
  3. Pull the lever.
  4. Lower the seat while simultaneously pulling the lever.
Each model is only fitted with one seat-folding mechanism, so if you have levers in the seats or buttons on the shoulders, you won’t find straps in the back.
Folding the seats can make a lot of extra space, but if you’re still struggling to fit everything in your car, consider removing the seats. It’s a bigger process than simply folding down the rear bench, but you’ll gain an enormous amount of space. 

How to find affordable Hyundai insurance

Before you hit the road in your Hyundai Veloster, make sure you have the car insurance coverage you need with
. A licensed broker, the Jerry app helps users compare personalized quotes from top providers
Just download the app, answer a few questions, and review the list of competitive quotes the Jerry app sends straight to your phone. When you find a quote you like, Jerry can help you switch plans and even help cancel your old policy. 
Users save an average of over $800 a year on car insurance and it only takes a minute to sign up.
“I decided to try
because my car insurance had been increasing drastically with each policy renewal. Jerry found me multiple ways to save after entering just a few pieces of info! I’m saving almost $70 a month after choosing Nationwide.” —Ish M.
rating reverse-full
"I’m earning
awesome rewards
every week, just for driving safe!”


The Hyundai Veloster has a removable back seat that can be taken out by removing four large bolts.
Are you overpaying for car insurance?
Compare quotes and find out in 45 seconds.
Try Jerry

Easiest way to compare and buy car insurance

No long forms
No spam or unwanted phone calls
Quotes from top insurance companies
Find insurance savings