The 2000 Honda Civic has a standard bolt pattern of 4x100 or 4 on 100, meaning each of its wheels has four bolts that create a circle 100 millimeters in diameter.
One of the easiest ways to give a tried and true vehicle a fresh look is to upgrade its factory wheels for a new set—and because vehicle components won’t last forever, it might eventually become a necessity. Whether it’s a want or a need, choosing the right set of new wheels can boost your performance, improve handling, and make for a smoother ride.
But to accomplish your goal, those new wheels must have a secure and proper fit. That means you’ll have to know your 2000 Honda Civic wheel specifications, including its bolt pattern—which you can find below.
4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars 4.7/5 app rating | Trusted by 5M+ drivers 2000 Honda Civic bolt pattern
The standard 2000 Honda Civic bolt pattern, also referred to as a lug pattern, is 4x100 millimeters, or 4 on 100. Given in inches, that would be 4x3.94. Here’s a simple breakdown of what this measurement represents:
# of bolts x diameter of the circle they form
That means each wheel on your 2000 Honda Civic has four bolts, and the arrangement of those bolts creates a circle with a diameter of 100 millimeters, or 3.94 inches.
To find a new set of wheels that’s the perfect fit, you’ll also need to know some additional wheel specifications:
Factory wheel size: 14” to 15”
Wheel tightening torque: 108 Nm
Depending on certain configurations, it’s possible your specific wheel specs might differ slightly from the ones shown here. A reputable wheel and tire shop can help you confirm your wheel specs if necessary and help you find the right fit.
How to measure your Honda Civic’s bolt pattern
It’s pretty easy to measure a 2000 Honda Civic’s lug pattern yourself—all you need is some measuring tape.
Measuring a vehicle’s bolt pattern is pretty straightforward, but it can vary slightly depending on how many lugs each wheel has. But since the 2000 Honda Civic’s wheels have a four-bolt arrangement, it’s even simpler.
All you need to do is pick any bolt hole on any wheel. Measure from the center of that bolt hole to the center of the bolt hole directly across from it. This gives you your pitch circle diameter (PCD).
Place this number after the number of bolt holes on each wheel (four in this case), and there you have it—your Honda Civic’s bolt pattern!
"Jerry
found me useful quotes immediately, so I switched over my insurance in under an hour! I’m now helping my parents use Jerry because they just bought a new car.” —Brindi J.
FAQs