Why you can trust Jerry
Jerry partners with some of the companies we write about. However, our content is written and reviewed by an independent team of editors and licensed insurance agents, and never influenced by our partnerships. Learn more baout how we make money, review our editorial standards, reference out data methodology, or view a list of our partners
- How often does a Mazda 3 need an oil change?
- What kind of oil does a Mazda 3 need?
- How much does an oil change cost for a Mazda 3?
- How to change the oil in a Mazda 3 yourself
- What happens if you don’t change the oil on a Mazda 3?
- How to save money on car insurance
Load full table of contents
You should change the oil in a Mazda 3 every 7,500 to 10,000 miles or every 12 months—whichever comes first—using SAE 5W-30 synthetic oil. Check your owner’s manual to make sure you’re using the correct grade and amount of oil.
Oil is essential to keeping your engine performing its best. It improves fuel efficiency and protects the engine from internal damage. However, old oil becomes dirty and viscous, making it important that you follow a regular maintenance schedule to get it changed.
Delaying oil changes may not seem like a big deal, but you may eventually face problems like corrosion, engine knock, or even total engine failure for doing so.
While every car make and model varies slightly, the general steps to changing engine oil are pretty straightforward. Car insurance shopping app Jerry has compiled all the information you need to ace your Mazda 3’s oil change.
Compare real <State> car insurance rates in just 45 seconds!
Quotes from up to 50+ companies
No long forms
No phone calls
How often does a Mazda 3 need an oil change?
You should change your oil every 7,500 to 10,000 miles or every 12 months, whichever comes first.
Delaying your oil change past 10,000 miles or 12 months could damage your engine, so it’s important to keep up with your maintenance schedule.
However, the exact amount of time you can go between oil changes depends on your driving habits. If you drive under harsh conditions, for example, the engine oil and filter should be replaced every 7,500 miles or every 10 months.
You should also check your oil level regularly and top it off if necessary.
What kind of oil does a Mazda 3 need?
The recommended engine oil for Mazda 3 is SAE 5W-30 oil for all climate conditions. However, SAE 10W-30 is also acceptable if you are operating the vehicle in moderate-to-hot climates.
The lower the W number, the less viscous the oil is and the less lubrication and protection it will provide. (Your oil’s ideal viscosity is chosen based on the lowest anticipated temperature you will experience before your next oil change.)
Using any non-recommended oil for your car could damage your engine or void your warranty. If you are changing your Mazda 3’s oil yourself, be sure to check your owner’s manual to ensure that you’re using the correct grade.
How much does an oil change cost for a Mazda 3?
The cost of an oil change for a Mazda 3 varies depending on whether you take the car to a shop or change the oil yourself.
For a professional oil change, you can expect to be charged around $104. This includes an estimated $71 for labor and $33 for synthetic oil.
Additional costs will be applied if your oil filter needs to be replaced.
You’ll save money by changing your oil yourself. A quart of 5W-30 synthetic oil costs anywhere from $4 to $13, and you can also find 5 quarts for between $10 and $40.
How to change the oil in a Mazda 3 yourself
What you’ll need
- Mazda 3 oil change tools
- Full synthetic 5W-30 synthetic oil (4.5 quarts)
- Compatible oil filter such as a Mobil 1 M1C-153, Mann ML 1019, or Purolator PL15505
- 17 mm socket or wrench
- Oil drain pan/container
- Jack stands
- Protective gloves and glasses
- Disposable towels for cleanup
- Owner’s manual
1. Warm up the engine
Turn your engine on for a few minutes to warm up to normal operating temperature. Then turn the engine back off.
2. Secure the car
Jack up your car and use jack stands to secure it in place. At a minimum, you will need to raise the front of the car, as the oil drain plug is located near the car’s front bottom.
3. Drain the old oil
Place the oil drain pan under the drain plug before removing the plug with the 17mm wrench. Allow the oil to drain into the container and inspect the oil drain plug.
If the washer or sealing is worn out, you will have to replace the drain plug to avoid damage to the oil housing.
After draining, torque the drain bolt to 22 ft-lbs, or the owner’s manual specification.
4. Remove the filter
The oil filter is under a large plastic belly pan on the bottom of your car. Remove the belly pan and place the drain pan under the filter (oil will gush out).
Remove the oil filter cap, take the filter out, and allow it to drain.
5. Install the new oil filter
Before installing the new filter, make sure to lubricate the o-ring with oil and replace it on the filter cap.
Slide the new oil filter down, on top of the plastic bar. Reinstall the oil filter cap and tighten it to 22 ft-lbs.
6. Put new oil in the engine
Pour 4.0 quarts of 5W-30 synthetic oil into the engine through the oil cap—using a funnel will minimize spills. Screw on the fill cap tightly, then run the engine for a few minutes to check for any leaks from the oil drain plug or filter cap. (This will also help saturate the filter with oil.)
If there are no leaks, you can reinstall the plastic belly pan on the bottom of your vehicle.
7. Stop the engine and check the oil level
After running the engine for a few minutes, turn it off and wait for three minutes. Check the oil level with the dipstick and add more if necessary.
8. Reset the oil change reminder
Turn on your car without starting the engine (i.e., press the START button without pushing down on the brake pedal).
Use the main control button to bring up the application or ‘A’ icon. Select ‘maintenance’ and then ‘oil change’ to find the reset option. Click to confirm the reset and your oil life should be set to 100%.
What happens if you don’t change the oil on a Mazda 3?
Oil changes are inconvenient but must be done regularly to protect your car engine. The oil keeps engine parts lubricated, which prevents corrosion and engine knock, distributes heat, and improves fuel efficiency.
The following problems can develop if you don’t keep up with your Mazda 3’s oil changes:
- Engine corrosion
- Decreased fuel efficiency
- Complete engine failure
Maintaining a regular oil change schedule will protect your car from these issues and help you avoid major repairs that can be extremely costly.
How to save money on car insurance
Just like getting regular oil changes, having the right car insurance is a necessity to protect others and yourself. Shopping for the right car insurance policy doesn’t have to be overwhelming, though—just use Jerry to find all the savings with none of the hassles!
As a licensed insurance broker, Jerry gathers quotes from over 50 top insurance companies within a minute and delivers the best results to your phone to compare. Pick the policy that suits your needs and Jerry will do the rest—including helping to cancel your old policy.
Not only is using Jerry quick and simple, but the average Jerry user can save an average of $879 a year!
“I was tired of looking around multiple websites, so I decided to give Jerry a try. Let me tell you—the process is so easy and simple, and they really find you the best prices for your coverage level. Getting insurance for my new car was quick and easy!” —Joanna D.
Compare auto insurance policies
No spam or unwanted phone calls · No long forms · No fees, ever