6.2 is a large SUV with a distinct look and powerful build. If you want your Yukon to run at peak performance, you’ll need to stay on top of your regular engine oil changes.

Engine oil changes are a regular aspect of car ownership. However, heading to the repair shop to have this job done can be expensive. To save cash, consider performing your oil changes at home. The first step of an at-home oil change is learning your Yukon’s engine oil capacity.

Jerry

, the

super app

that saves drivers time and money on

car insurance

shopping, has created this helpful guide to teach you your 2016 GMC Yukon 6.2’s engine oil capacity. We’ll also go over how to do your own oil changes and save money on your car insurance.

Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs

* checking your rate won’t affect your credit score

Get ahead of my car maintenance

* checking your rate won’t affect your credit score

2016 GMC Yukon 6.2 engine oil capacity

The 2016 GMC Yukon 6.2 has an engine oil capacity of eight quarts.

This GMC is powered by a 6.2L engine with a formidable 420 horsepower and 460 lb-ft of torque. Note that the 6.2L refers to the engine displacement, which is how much volume the cylinders take up, and is unrelated to the engine oil capacity.

Make sure you don’t confuse these two numbers when filling your engine with oil.

What kind of oil does a 2016 GMC Yukon 6.2 need?

It’s crucial you use a compatible type of engine oil when refilling your 2016 GMC Yukon 6.2. With so many oil types on the market, make sure you know exactly what to buy before heading to the auto parts store.

For the 2016 GMC Yukon 6.2, you’ll want a full synthetic SAE 0W-20 engine oil. Synthetic oil is blended to deliver the best possible results. However, it’s also more expensive than conventional oil.

Owner's manual recommendation: GM Original Equipment™ Dexos 1™ SAE 0W-20 Full Synthetic Motor Oil

Let’s break down what 0W-20 means. The numbers in this label refer to the viscosity, or thickness, of the oil at different temperatures. The first number is its thickness in extreme cold, while the second number is the viscosity at normal engine operating temperature.

MORE:

Ultimate FRAM oil filter guide

How often to change oil on a 2016 GMC Yukon 6.2

Synthetic oil is manufactured to lengthen the time between oil changes. Many synthetic oils enable you to wait 7,500 to 10,000 miles between oil changes.

However, it's best to stick with the manufacturer’s recommended oil change interval. For the 2016 GMC Yukon 6.2, you should have your oil changed every 3,000 to 5,000 miles. This will keep your engine clean and running well.

While you shouldn’t go over the recommended oil change interval, there are instances when you should change your engine oil sooner. Be on the lookout for the following warning signs that it’s time for an engine oil change:

The motor oil is dark brown or black (Clean oil is light brown or amber)

Motor oil feels gritty

Their are

unfamiliar noises

coming from your engine

Oil, smoke, or burning smells

A decrease in your vehicle’s performance

MORE:

GMC Yukon towing capacity

How to change your oil and oil filter

With the above information, you’re now ready to change your oil at home! We’ll also change the oil filter, which helps keep your engine oil clean while moving through the engine.

In terms of equipment, you’ll need a drain pan, a filter wrench, a socket wrench, a new filter, and a fresh bottle of engine oil.

The first step is to let your engine run for just a few minutes. By warming up to regular operating temperature, the engine oil will flow much easier. Now, put on some gloves, pop the hood, and get to work:

Remove the oil fill cap. If you can’t remove after you’ve already drained your oil, your car won’t be able to move

Remove the oil drain bolt. This is on the underside of your car

Let the old oil drain into the drain pan

While the oil drains, remove the old oil filter and install the new oil filter

After your oil is drained, use a new washer to put your drain bolt back on your car

Pour fresh oil into your engine

Once your engine is full, you can replace the fill cap

After changing your oil, it’s a good idea to turn on your car and let your engine run for about 30 seconds before you check the oil level. This will give you a more accurate measurement, and you’ll be able to top it off if necessary.

Make sure to run your engine in order to check for leaks or see if any dashboard warning lights have popped up.

The final step is to properly throw out your old engine oil. To do so, place the oil in a sealable container before bringing it to a recycling center. Don’t just pour it out!

Don’t forget regular insurance policy maintenance

Just like regular oil changes, having the right car insurance coverage is a crucial aspect of car ownership. If you want to find a great car insurance policy at a fair price, download the

Jerry

app.

licensed insurance broker

, Jerry is specifically designed to simplify your car insurance shopping journey. One fast, free sign-up gives you a long list of competitive quotes, all from top providers. You can use these quotes to find a new policy at a fair price. Once you’ve selected a new policy, Jerry will even help you with all your sign-up paperwork!

Users who compare and switch with Jerry save an average of over $800 a year on car insurance payments.

“I just had to buy a new car, and I needed quick help to get insurance before I could get my plates. Because I work so many hours,
Jerry
was the ideal choice for getting things done without long phone calls and waiting periods.” —Rosa G.