2010 Silverado Bolt Pattern

Here’s everything you need to know about the 2010 Chevy Silverado bolt pattern so you can put some sweet new wheels on your truck!
Written by Drew Waterstreet
Reviewed by Brittni Brinn
background
A 2010 Chevy Silverado has a bolt pattern of 6x5.5, which means each wheel must have six bolts that form a circle with a diameter of 5.5 inches. 
Believe it or not, there’s more to upgrading your truck with a bigger set of wheels than just showing off. In fact, they give you the potential to increase ground clearance, equip larger tires, and improve payload capacity. But before you start shopping, you’ll need to know the bolt pattern to make sure your new wheels will fit!
Luckily, you’ve come to the right spot! In this article, we’ll break down all the measurements of the 2010 Silverado bolt pattern that you need to know. And as a bonus, we’ll even show you
how you can save money
on your
car insurance
using the quote comparison app,
Jerry
—which you could then spend on even bigger wheels (as long as they fit, but that’s why you’re here)!
Compare insurance quotes from 50+ insurance companies with Jerry in under 45 seconds
Compare insurance quotes from 50+ insurance companies with Jerry in under 45 seconds
icon4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars
icon4.7/5 app rating | Trusted by 5M+ drivers

2010 Silverado bolt pattern

The bolt pattern (sometimes called lug pattern) for the 2010 Chevrolet Silverado 1500 light-duty truck is 6x5.5, which can be interpreted as # of bolts x the diameter of the circle they form
But if you're looking for replacement or aftermarket wheels, you’ll need to know more than just the bolt pattern. Here are some additional wheel measurements that must be met:
  • Factory wheel size: 17” to 22”
  • Stud size: M14 x 1.5
  • Offset: 20 to 40 mm
  • Center bore: 78.1 mm
  • Wheel tightening torque: 190 Nm

How to measure your Chevy Silverado’s bolt pattern

If you’d like to double-check our work (we’re not offended), you can easily confirm your Silverado’s bolt pattern with a tape measure or basic ruler.
Since the 2010 Chevy Silverado has six bolts, every bolt will have another bolt straight across from it in the circle. So pick any bolt and measure from the center of the lug hole to the center of the opposite bolt. That measurement equals your diameter.

How to optimize your Silverado’s insurance coverage

As promised, we want to show you how
Jerry
can help you save on your
Silverado insurance
and open some more room in your budget for bigger, better, and badder wheels!
Here’s how it works: in less than 45 seconds, our
trusted digital brokerage service
analyzes quotes from over 55 top providers and instantly isolates the policy that simultaneously gets you the most coverage while saving you the most money! On average, this speedy process reveals over $800 in potential annual car insurance savings to our users.
Then, all you have to do is give us the green light, and we’ll help you get signed up with your new and more affordable provider!
 “I love how easy it was for me, as someone who has an older beat-up truck, to get insurance without going through a lot of trouble. I would recommend anyone try
Jerry
, since it’s free!” —Melissa I.
Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs
* checking your rate won’t affect your credit score
Get ahead of my car maintenance
* checking your rate won’t affect your credit score

FAQ

The bolt pattern on a 2010 Silverado is 6x5.5, which means six bolts that form a 5.5-inch-diameter circle.
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
Try GarageGuard™

Easiest way to compare and buy car insurance

√
No long forms
√
No spam or unwanted phone calls
√
Quotes from top insurance companies
Find insurance savings