A 1996 Ford Ranger bolt pattern is 5x4.5. In other words, each tire has five bolts and these bolts form a circle that is 4.5 inches in diameter.
Your lug pattern is the first bit of information you need to lock down if you’re upgrading your wheels. In addition, you’ll need to know your offset, stud size, and torque specifications. Luckily for you, we’ve gathered all the information you need in one place!
Before you make an upgrade-related purchase, we’re going to cover everything you need to know about your 1996 Ford Ranger bolt pattern. Let’s dive in!
4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars 4.7/5 app rating | Trusted by 5M+ drivers 1996 Ford Ranger bolt pattern
Your Ford lug pattern
is specific to your Ranger, although some Fords share the same lug pattern (aka bolt pattern). Your 1996 Ranger’s wheels have a 5x4.5 bolt pattern. The basic formula for bolt patterns is:
# of bolts x diameter of the circle they form
The first number in your 5x4.5 pattern is 5, which tells you that your Ranger has five lugs in each wheel. The second number tells you how the lugs are arranged. In your vehicle, the lugs are set in a circle that is 4.5 inches in diameter.
That’s not all the info you need, though. If you’re planning to upgrade your Ford Ranger’s wheels, you’ll also need to know the factory wheel size, stud size, offset, center bore, and torque specifications. Your owner’s manual
has this information, but we’ve also compiled it for you here: Factory wheel size: 14” or 15”
Wheel tightening torque: 135 Nm
How to measure your Ford Ranger’s bolt pattern
It’s easy to measure a Ford bolt pattern with common household measuring tools. Get a measuring tape or a ruler and head out to your car. Pick any wheel and you’re ready to start.
Find one bolt. Place the beginning of your measuring instrument at the outer edge of this lug hole. Now, this part is a little tricky. Your 1996 Ranger has five bolts, so there is not a bolt directly across the imaginary circle on the hub. Instead, bring the end of the ruler toward the place where a hole would be, and then pick one of the lug holes next to that imaginary spot.
Measure from the outer edge of the first lug hole to the center of the “opposite” bolt. This measurement is your diameter, and it should come out to 4.5 inches. In combination with the number of bolts (5), you can see for yourself that your 1996 Ford Ranger bolt pattern is 5x4.5.
"Jerry
helped me find insurance for my mom’s new car. It was perfect.” —Bennett R.
FAQs