Jeep Liberty Tire Pressure

Your Jeep Liberty tire pressure should average 33 psi on both the front and rear tires for most trims.
Written by Jennifer Justice
Reviewed by Melanie Reiff
background
The recommended Jeep Liberty tire pressure is 33 pounds per square inch (psi) for all four tires.
If you think getting stuck by the side of the road because you got a flat tire doesn’t sound fun, you’ll want to pay attention to your tire pressure. The correct tire pressure helps you avoid getting a flat, and it improves your fuel efficiency at the same time.
You can use
this guide from
Jerry
to find out more, including the right tire pressure to use, how to measure tire pressure in the first place, and how you can reset that warning light on your dashboard. Jerry is a
trusted insurance comparison app
, so we’ll even throw in some tips about your
Jeep Liberty insurance costs
.
Don't get ripped off!
Estimate repairs near you with GarageGuard™ for free so you KNOW the fair price.
No spam or unwanted phone calls · No long forms
No spam or unwanted phone calls · No long forms · No fees
icon4.717k Ratings
5M+Drivers Joined
7M+Cars Garaged

What is the right tire pressure for a Jeep Liberty?

A Jeep Liberty uses 33 psi for both the front and back tires, regardless of what year your Liberty was made, the tire size, or trim. If you want to check those numbers, you can dig out your owner’s manual or look for the sticker inside the driver’s door frame. Of course, if you replace the original factory tires, you’ll want to check the recommended tire pressure for those new wheels.

Tire pressure recommendations for other Jeep vehicles

Vehicle
Front tire pressure
Rear tire pressure
Jeep Cherokee
33-36 psi
33-36 psi
Jeep Gladiator
37 psi
37 psi
Jeep Renegade
35 psi
35 psi
Jeep Compass
32 psi
28 psi
Jeep Grand Cherokee L
36 psi
36 psi
MORE: How low can your tire pressure go?

How to check Jeep Liberty tire pressure

Since Jeep Liberty is an older model, you won’t have a fancy touchscreen display—instead, the Liberty uses the Electronic Vehicle Information Center (EVIC) for warning messages. While it does use a tire pressure monitoring system (TPMS), the readout cannot give you the specific tire pressure, it can only warn you when the pressure is too low.
This means you have to be more proactive and check your tires if you want to know the actual psi at any given moment. Fortunately, all you need is
a tire pressure gauge
and a willingness to keep up a
proper vehicle maintenance
schedule. If you don’t keep a pressure gauge in your vehicle, you can always use the one provided by gas stations at their air-filling stations.
When you want to check your tire pressure, get out your tire gauge, then follow these few simple steps:
  • Unscrew the cap on the valve stem of the tire you want to check
  • Press the end of the gauge onto the valve stem
  • Check the reading on the gauge
  • Add/release air as needed so the tire’s reading matches the recommended 33 psi
Since the Jeep Liberty uses an older TPMS to keep an eye on the tire pressure, you want to be on the lookout for warning signs that you need to check your tires:
  • It’s harder to steer
  • You hear a flapping sound
  • The ride is a bit bumpy, even on level ground
  • It takes a little longer to stop
  • Your fuel efficiency goes down
Remember that it’s always better to check your tires if you aren’t sure, so don’t wait until your low tire pressure warning light comes on if you suspect anything.

How often should you check tire pressure?

Keep up with a once-a-month system. It’s also good to check your tire pressure before a big trip or if the temperature changes outdoors significantly.

How to tell if your Jeep Liberty needs new tires

For average wear and tear, you want to put new tires on your Jeep Liberty every six years or 50,000 miles. However, be extra careful if you love off-roading or tend to drive on rough terrain since this will be harder on your tires. Watch out for any cracks or bulges, and you want to visually inspect the depth of your tire tread whenever you check tire pressure—if the tread starts to look worn down, think about getting new tires.
If you want to be able to measure the tread depth, you can always use the penny method (or a quarter). If the tread starts to look shallow, place a US penny in one of the tread grooves so that Lincoln is upside down. The tread should cover up the top of his head, so if it’s visible above the groove, the tires need to be replaced.
Don't get ripped off!
Estimate repairs near you with GarageGuard™ for free so you KNOW the fair price.
No spam or unwanted phone calls · No long forms
No spam or unwanted phone calls · No long forms · No fees
icon4.717k Ratings
5M+Drivers Joined
7M+Cars Garaged

How to reset the Jeep Liberty tire pressure monitoring system (TPMS) light

Anytime you change something about your tires, whether you add air or get new wheels, you must
reset your TPMS
. Since Liberty uses a basic TPMS, you just need to drive your Jeep for about 20 minutes for the system to register the change.
Be aware that the warning light may stay on if something interferes with the radio signal that helps measure tire pressure. If you add window tinting or something is getting between the tire and the sensor, such as snow buildup or tire chains, this can lead to an incorrect reading. Check for possible debris in the tire well and clear the space, but if the warning light is still on, you want to take your Jeep to a mechanic.

How to save on Jeep Liberty insurance

Keeping up with the correct tire pressure is important for safety and minimizing costs, such as avoiding burning through fuel more quickly. There are other ways to save money on your Jeep Liberty, like making sure you aren’t overpaying for
Jeep Liberty insurance
.
Fortunately, if you’re looking for a new
car insurance
company, 
Jerry
can provide you with competitive quotes in under a minute. Swapping is just as effortless. The trustworthy super app takes care of all the paperwork and phone calls and can even assist you in canceling your old policy!
“When using
Jerry
, I just put in a bit of information, and they found lots of different quotes for me. I was paying $305 a month for 2 brand-new cars, but now I’m paying $150 a month for both with full coverage!” —Robin U.
RECOMMENDED
Haven’t shopped for insurance in the last six months? There might be hundreds $$$ in savings waiting for you.
avatar
Judith switched to Progressive
icon savingsSaved $725 annually
avatar
Alexander switched to Travelers
icon savingsSaved $834 annually
avatar
Annie switched to Nationwide
icon savingsSaved $668 annually
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
Try GarageGuard™

Easiest way to compare and buy car insurance

√
No long forms
√
No spam or unwanted phone calls
√
Quotes from top insurance companies
Find insurance savings