2007 Ford Explorer Bolt Pattern

The bolt pattern on your 2007 Ford Explorer is 5x4.5—but we'll show you how to measure it, as well as the stud size and offset specs.
Written by Claire Beaney
Reviewed by Melanie Reiff
The bolt pattern for the 2007 Ford Explorer is 5x4.5, which indicates five bolts in a circle measuring 4.5 inches in diameter.
If you want to replace your factory wheels, you must be familiar with your lug pattern, offset, stud size, and torque specifications. And if you're a Ford owner who values a dependable vehicle, this article will show you how to upgrade your Explorer without sacrificing security. Good tires and quality
car insurance
will allow you to drive wherever you want!
Learn more about the specifics of your 2007 Ford Explorer's bolt pattern down below.
Compare quotes from 50+ insurers with Jerry in under 45 seconds?
icon4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars
icon4.7/5 app rating | Trusted by 5M+ drivers

2007 Ford Explorer bolt pattern

Not all
Ford lug patterns
are the same. This is important to remember because even if you have a spare set of Ford wheels, there's a good chance they won't fit your car. You'll need to choose a set that matches the lug pattern on your 2007 Ford Explorer—5x4.5 or 5 on 4.5.
Don't stress if you can't make heads or tails of those numbers. The lug pattern of a car can be described as follows:
# of bolts x diameter of the circle they form
Your Explorer's wheels have five lugs each, as indicated by the first number in the 5x4.5 measurement. The lugs are arranged in a 4.5-inch diameter circle, which can be seen in the second number.
The number of lugs and the diameter of the circle they form aren’t the only measurements you'll need. Specifics such as your Ford's wheel diameter, stud size, offset, center bore, and torque are also crucial.
Here are the specs:
  • Factory wheel size: 16”, 17”, 18”
  • Stud size: M12 x 1.5
  • Offset: 20 to 35 mm
  • Center bore: 70.5 mm 
  • Wheel tightening torque: N/A

How to measure your Ford Explorer’s bolt pattern

You can double-check the measurements above to ensure that they are accurate for your 2007 Ford Explorer. All you need is a measuring tape (or ruler!).
Choose a bolt and a wheel. Because your Explorer has five bolts, measure from one lug hole's outer border to the center of the opposing bolt. There is no bolt precisely opposite in this arrangement, so travel straight across the circle, select one of the bolts nearest to you, and measure to its center.
The diameter you're measuring out should be 4.5 inches. Adding that to the total number of bolts (5) yields the 5x4.5 bolt pattern that fits your 2007 Ford Explorer.
Let Jerry find your price in only 45 seconds
No spam · No long forms · No fees
Find insurance savings


The bolt pattern on a 2007 Explorer is 5x4.5—five bolts in a 4.5-inch-diameter circle.
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
Try GarageGuard™

Easiest way to compare and buy car insurance

No long forms
No spam or unwanted phone calls
Quotes from top insurance companies
Find insurance savings