If you need to top off or change the oil in your 2006 Honda CR-V, you should know that it has a 4.4-quart engine oil capacity across all trims. This model takes 5W-20 motor oil.

Honda produces a steadfast lineup of long-lasting vehicles that are inexpensive to maintain, and the 2006 CR-V is no exception. For those reasons, you can easily and affordably take care of your CR-V with a proper

car maintenance schedule

, which includes monitoring the oil level and changing it as needed. Doing so will keep your 2006 CR-V running for many more years.

If you’re ready to take on some of the simple maintenance work, like oil checks and changes, this guide will show you the ropes. We’ll tell you everything you need to know about the 2006 Honda CR-V’s engine oil capacity, its oil type, how to check it, and how to change it.

MORE:

How to save on your Honda CR-V car insurance costs

2006 Honda CR-V engine oil capacity

Before you decide to add engine oil to your vehicle, you need to know two things: what type to add, and how much it needs. We’ll start with your CR-V’s engine oil capacity.

Your 2006 Honda CR-V takes 4.4 quarts of engine oil. However, the amount in your car may decrease within a safe range over time between oil changes. It’s important to check your oil occasionally—once a month or with every other gas tank fill-up should be sufficient—to make sure the oil level doesn’t get too low.

Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs

* checking your rate won’t affect your credit score

Get ahead of my car maintenance

* checking your rate won’t affect your credit score

What kind of oil does a 2006 Honda CR-V need?

If it’s time to

change the oil and filter

on your 2006 CR-V, or if you just need to add a little oil between changes, you’ll want to make sure you get the correct oil type. Otherwise, you could ruin your engine!

While Honda suggests you only use Honda Motor Oil in your CR-V, you can certainly use other brands. What matters most is that you only use SAE 5W-20 motor oil. Honda also suggests your engine oil includes a seal on the container indicating it’s certified by the American Petroleum Institute.

MORE:

Ultimate FRAM oil filter guide

How often to change the oil on a 2006 Honda CR-V

While most vehicles call for an oil change every 3,000 or 5,000 miles, your 2006 Honda CR-V has a lot more longevity. According to Honda, you’ll only need to change your engine oil every 10,000 miles, or once a year, whichever comes first.

However, certain driving conditions or environmental issues might require you to get an oil change sooner than the recommended timeframe. For instance, if you’ve routinely hauled extra-heavy loads or driven up steep inclines regularly, your engine oil might age a little faster than average. Regular

wear and tear

on your older model may also cause you to burn up oil faster.

When you check your oil, take a good look at its condition. Here’s what you should be on the lookout for:

Engine oil that appears dark brown or black

Dirty oil that feels gritty

Unusual noises when you drive

A burning smell

A decline in how your vehicle performs

MORE:

How long do Hondas last?

How to change your oil and oil filter

If you’re due for an oil change and you’d like to tackle the job yourself, you’ll just need a handful of tools and supplies and 4.4 quarts of SAW 5W-20 motor oil.

To get started, grab a filter wrench, socket wrench, drain pan, drain plug gasket, a replacement oil filter, and engine oil. Once you’ve got everything together, turn your CR-V’s ignition on and let the engine run for about five minutes so it can warm up. Then, shut the engine off,

open the hood

, and follow these steps:

Unscrew your oil cap.

Go underneath your car to remove your oil drain bolt and washer.

Place your oil drain pan where the old engine oil can drain into it.

Take off the old oil filter.

Put on the new oil filter.

Replace the oil drain bolt along with the drain plug gasket, tightening it to 29 lb-ft.

Fill the oil tank with 4.4 quarts of your new engine oil.

Once you’re done, start the car up again and let it warm up. After a few minutes, check your oil level with the dipstick, and if it’s a little low, simply add more oil. Also, take a few minutes to check for leaks while your engine runs. Look at your instrument panel and ensure your

oil pressure light

is off.

If everything looks good, you’re almost done! The last thing you need to do is dispose of your used engine oil. Used engine oil should not be dumped or thrown away. Instead, secure it in a sealed container and take it to an engine oil recycling center.

“I would 11/10 recommend
Jerry
. I was originally quoted $700+ for insurance for my new car, but by using Jerry I got my payments down to $320 a month. They also have a great support team ready to answer any questions!” —Tobias F.

RECOMMENDED