The proper tire pressure for a Toyota C-HR is 33 pounds per square inch (PSI) for the front and rear tires.
Ensuring you keep the correct amount of pressure in your tires is essential to staying safe on the streets. Without the right pressure, not only will you notice lower fuel efficiency, but you’ll be at risk for steering difficulty or a blowout. All of these can lead to expensive repairs to handle in the aftermath.
Lucky for you, Jerry
—the top-rated car insurance
super app—is here with all the details you need about your Toyota C-HR’s tire pressure. We’ll give you the right tire pressure, teach you how to check it on your C-HR, and help you find the cheapest Toyota car insurance
! What is the right tire pressure for a Toyota C-HR?
For the Toyota C-HR, the recommended tire pressure is 33 psi for the front and back tires. This goes for all trims and models of the C-HR—unless you’ve upgraded your C-HR’s tires to high-performance tires like summer tires. This may affect the recommended tire pressure, so check with the specific tires you have.
In any case, it’s never a bad idea to double-check the correct tire pressure for your car in your owner’s manual—or by checking the sticker on the door frame of your driver’s side.
Tire pressure recommendations for other Toyota vehicles
MORE: How low can your tire pressure go?
How to check Toyota C-HR tire pressure
Even if you don’t consider yourself a master mechanic, you can still check your own tire pressure. If your C-HR’s Tire Pressure Monitor System (TPMS) senses critically low pressure in one of your car’s tires, you’ll see the low pressure icon pop up in your instrument display as well as a message in your Multi-Information Display.
There’s a chance that switching tire sizes or rotating your tires could trigger the sensor, but if the light stays on, be sure to check all your tire pressure levels. Here’s how to check them yourself:
Remove the tire’s valve stem cap
Place the gauge on the stem
The gauge will reveal the pressure reading from the tire, letting you know if it’s in need of more air—or less! No tire pressure gauge? No problem—just head over to the gas station’s air filling station and use the gauge they have.
For Toyotas, the TPMS only catches critically low pressure—so you’ll want to look out for signs of low tire pressure on your C-HR before the TPMS notices. Keep an eye out for diminished performance, unstable steering, or an uneven ride. When in doubt, check your tire pressure!
How often should you check tire pressure?
Ideally, you should check your tire pressure about once a month or before any long drives.
How to tell if your Toyota C-HR needs new tires
Typically, you should expect to change your C-HR’s tires around every six years—but this may vary, so make sure you’re checking your tires for any wear or abnormalities while you’re checking tire pressure. If you spot any abnormal cracks, low tread depth, or bulges in your tires, you’ll want to get to the tire shop soon.
Don’t know how to recognize low tread depth? Just grab a penny and stick it into your tire’s tread with Lincoln’s head facing the tire. If you can see Abe’s head, it’s time for a new tire.
How to reset the Toyota C-HR tire pressure monitoring system (TPMS) light
Once you’ve corrected the tire pressure for your C-HR, it’s smooth sailing—unless your TPMS indicator light is still on. If you’re certain the tire pressure is right and your tires are in good shape, you probably just need to reset your TPMS
. First, try driving your Toyota at or above 50 mph for at least 10 minutes, then turn your car off and on again. If this didn’t do the trick, follow these steps:
Turn your key to the “on” position without starting your CH-R.
Locate the TPMS reset button to the lower right of the steering wheel on your instrument panel.
Hold down the button until your tire pressure light blinks three times, then let go.
Start your vehicle and wait up to 20 minutes for your sensor to reset.
If that fails to reset your light, inflate all of your tires to 36 psi, then deflate all of them. Then reinflate them back to the recommended 33 psi. You may need to do this for your spare tire, too!
If none of these methods worked, it may be time to take your C-HR to your local Toyota dealership or a reliable mechanic to figure out what’s going on.
How to save on Toyota C-HR insurance
Keeping up with your car’s tire pressure and other routine maintenance is one of the best ways to ensure lower car-related expenses. Not only will healthy tires help your fuel economy, but you’ll have a higher chance of evading pricey accidents and repairs.
Want to lower your ownership costs even more? Just download the Jerry
app to find a new Toyota C-HR car insurance
policy. Sign-up is free, and the process is simple! As a licensed insurance broker
, Jerry sorts through quotes from over 55 top providers and delivers customized options to your phone in 45 seconds. Find a good deal? Jerry agents are ready to walk you through the sign-up process so you can start saving ASAP. “Jerry
made everything super easy! I got the best and cheapest deals. And it’s my first time buying insurance! What a deal!” —Abby W.