Melanie Reiff
Updated on Aug 11, 2022
If your vehicle’s coolant temperature switch or sensor malfunctions, you will need a mechanic to replace this part with a new one. Otherwise, your engine could risk overheating, causing severe damage to your car.
A vehicle’s coolant temperature sensor reads your car’s engine temperature and alerts the engine control module to adjust key engine functions, such as its air-fuel mix. Some cars have a coolant temperature switch, which is similar—this switch turns the engine’s cooling system fan on at designated temperatures in order to keep the engine safe.
The cost to replace a coolant temperature switch or sensor will vary by make and model, but in general, such a replacement will cost between $150 to $200.
Your vehicle’s coolant temperature switch or sensor is key to your car’s cooling system, so car insurance super app Jerry has put together a handy guide to ensure you know everything about replacing this key component.
The exact cost varies between different Maserati models. For example, newer vehicle models are usually made with more expensive materials, so recent or high-end models will cost more, especially if your service requires a part replacement. Use the table below to estimate the cost for your own vehicle.

What is a coolant temperature switch (sensor) replacement?

Your mechanic will replace your vehicle’s coolant temperature switch or sensor in order to:
  • Ensure your engine is being cooled properly to avoid overheating
  • Prevent erroneous ignition timing
  • Make sure your engine’s air-fuel mix is calculated correctly

How is a coolant temperature switch/sensor replaced?

If you fear your car’s coolant temperature switch or sensor needs to be replaced, pay a visit to a reputable and qualified mechanic. They will take the following steps to inspect and replace the switch/sensor if needed:
  • Verify that the coolant temperature switch or sensor needs replacing
  • Drain coolant from the system
  • Disconnect defective switch or sensor from the connector, and then separate and remove it from the manifold
  • Install a new switch or sensor by fastening it to the mounting hole in the manifold and reconnecting it to the system’s electrical connector
  • Refill coolant
  • Test system for proper operation

What are the signs that a coolant temperature switch/sensor needs replacing?

The following is a list of the most common signs that your switch or sensor might need replacing:
  • Check Engine Light is on
  • Your engine has overheated
  • The coolant fan runs inconsistently
  • Your engine idles noisily, misfires, or stalls
  • The coolant temperature is unstable

How important is it to replace a faulty coolant temperature switch or sensor?

It is vital to replace a defective coolant temperature switch or sensor as soon as you can. Otherwise, you run the risk of your cooling fan acting erratically, and your engine overheating as a result.
An engine overheating can lead to severe engine damage, and this will be much pricier to repair than simply replacing a faulty temperature switch or sensor.
A properly functioning coolant temperature switch or sensor tells your engine control module the information it needs to properly determine your engine’s proper air-fuel mix. If this mixture isn’t correct, your car’s fuel economy will suffer, your engine may underperform, or it may cease to function entirely.

Tips

Some tips when considering whether to replace your coolant temperature switch or sensor:
  • A defective switch or sensor can shorten the life of your motor’s cooling fan
  • Some vehicles have separate sensors that display the engine’s temperature—this is displayed on the temperature gauge on the dashboard

Protecting your vehicle with Jerry

Maintaining your car’s cooling system, and making sure to replace a broken temperature switch or sensor, are essential to keeping your car operating as it should. Keep your vehicle equally protected with a robust car insurance policy that won’t break the bank.
Jerry is an insurance comparison app that shops for low prices with over 50 different insurance companies for free. You will get quotes in seconds, can make changes at any time, and if you ever have any questions, agents are just a text away!
Keep in mind that your location is another factor that determines the final cost of repairs. Areas with higher cost of living will usually have more expensive car repair services, especially if there’s less local competition. Check out the table below for an estimate of what Maserati drivers pay in different cities.
Jerry doesn’t just offer fair price repair estimates for Maserati drivers! Our team of writers has collected everything you need to know for every car. Here’s how much the repair costs for some popular cars:
CarTotal Cost EstimateParts CostLabor CostAverage Dealer PriceEstimated Service Duration
1969
Ford 
E-200 Econoline
$110.28$48.28$62$124.761.03h
1989
$71.99$11.99$60$75.581h
1984
Toyota 
Van
$77.49$11.49$66$80.931.1h
1990
$71.26$11.26$60$74.631h
1965
$85.98$23.98$62$93.171.03h
1969
Ford 
E-200 Econoline
$110.28$48.28$62$124.761.03h
The cost of repairs might vary depending on which Maserati you drive, but there’s an easy way to save money for the services you need! Just download the Jerry app for help lowering your insurance premiums. In less than 45 seconds, Jerry collects all of your information from your existing insurer. Choose from competitive quotes from top insurance companies and Jerry takes care of the rest—securing your new policy and helping you cancel your old one upon request.
With an average annual savings of $887, Jerry can help you free up funds for the repairs your Maserati’s needs.