Melanie Reiff
Updated on Aug 11, 2022
If you notice a clunking or knocking sound coming from your car’s wheels, a mechanic can lift the vehicle to begin a comprehensive inspection of the undercarriage—locating the source of the noise and providing an estimate for the repair cost.
A clunking or knocking noise from your wheels can be an annoying and potentially hazardous issue. This type of noise will usually result from problems with your vehicle’s suspension—which is why you should get your car inspected by a mechanic as soon as you notice this problem.
To prevent further damage, the car insurance super app Jerry has everything you need to know about getting a clunking or knocking noise inspected.
The exact cost varies between different Subaru models. For example, newer vehicle models are usually made with more expensive materials, so recent or high-end models will cost more, especially if your service requires a part replacement. Use the table below to estimate the cost for your own vehicle.
CarTotal Cost EstimateParts CostLabor CostAverage Dealer PriceEstimated Service Duration
2012
$60$0$60$601h
2007
Subaru 
B9 Tribeca
$60$0$60$601h
2017
Subaru 
BRZ
$60$0$60$601h
1991
Subaru 
XT
$60$0$60$601h
2016
$60$0$60$601h
1983
Subaru 
DL
$60$0$60$601h

What is a clunking or knocking noise from wheels inspection?

During this service, a mechanic will investigate the vehicle’s suspension system. Your suspension is charged with absorbing force created by driving on uneven roads, and it’s integral to keeping a car in top condition.
A clunking or knocking noise can also come from a vehicle’s steering system, which, like the suspension system, can be seen after a lift raises a car.
Some common components that may cause the noise are as follows:
  • Bad ball joints
  • Worn sway bar link
  • Damaged tie rods
Each of these parts will differ in the cost and time needed for replacement.

How to inspect a clunking or knocking noise from wheels

Before beginning the inspection, an auto professional will ask you:
  • When have you observed the clunking or knocking noise?
  • In what situations is it most prevalent?
After this quick interview, the mechanic will raise your vehicle and officially diagnose the problem.

If your mechanic suspects bad ball joints

To diagnose this problem, a mechanic will gently shake your vehicle (after it has been lifted), looking for any give in the front tires. If there is, the mechanic will identify the problem as bad ball joints. The next step is to remove the wheels and control arms to begin a replacement.

If your mechanic suspects worn sway bar

A mechanic will investigate your sway bar for signs of damage or rust. If the sway bar looks okay, the clunking noise could result from worn bushings, which are not too difficult to replace, luckily.

If your mechanic suspects damaged tie rods

A mechanic will examine your vehicle’s tie rods for signs of damage or a lack of lubrication. If this is the culprit, the mechanic can perform a quick replacement by removing the damaged tie rod, adding a new one, and ensuring the entire system is properly lubricated.

When do I need to inspect a clunking noise coming from my wheels?

You should get this type of noise inspected as soon as possible. Issues with your vehicle’s suspension and steering can only get worse after you first discover them. So by keeping your eyes—and ears—tuned toward any abnormal sounds, you can help prevent your car from needing more extensive repairs.

How to find cheap car insurance

Just like you wouldn’t want to drive on a faulty steering system, there’s no reason to continue overpaying for the protection your car needs. And when it comes to finding the best rates, the car insurance super app Jerry has you covered.
Jerry will generate competitive quotes from top providers in less than a minute. If you’re looking for a new provider, Jerry gathers your information from your past insurer, so you’re not responsible for any long forms or phone calls. Basically, you get all of the savings and coverage, with none of the hassles.
The best part? Jerry customers save an average of $879 a year.
Keep in mind that your location is another factor that determines the final cost of repairs. Areas with higher cost of living will usually have more expensive car repair services, especially if there’s less local competition. Check out the table below for an estimate of what Subaru drivers pay in different cities.
CityCarTotal Cost EstimateParts CostLabor CostAverage Dealer PriceEstimated Service Duration
2020
Subaru 
Ascent
$111.66$0$111.66$111.661h
1989
Subaru 
Justy
$122.12$0$122.12$122.121h
2017
Subaru 
BRZ
$108.78$0$108.78$108.781h
2003
Subaru 
Legacy
$108.4$0$108.4$108.41h
2006
$112.5$0$112.5$112.51h
2016
$111.48$0$111.48$111.481h
2020
$115$0$115$1151h
1991
Subaru 
XT
$105.6$0$105.6$105.61h
1981
Subaru 
Brat
$110.83$0$110.83$110.831h
2012
$111.58$0$111.58$111.581h
Jerry doesn’t just offer fair price repair estimates for Subaru drivers! Our team of writers has collected everything you need to know for every car. Here’s how much the repair costs for some popular cars:
CarTotal Cost EstimateParts CostLabor CostAverage Dealer PriceEstimated Service Duration
1994
GMC 
C1500 Suburban
$60$0$60$601h
2019
BMW 
740i
$60$0$60$601h
1993
Buick 
LeSabre
$60$0$60$601h
1995
Lotus
 
Esprit
$60$0$60$601h
1992
Dodge 
Spirit
$60$0$60$601h
2000
$60$0$60$601h
The cost of repairs might vary depending on which Subaru you drive, but there’s an easy way to save money for the services you need! Just download the Jerry app for help lowering your insurance premiums. In less than 45 seconds, Jerry collects all of your information from your existing insurer. Choose from competitive quotes from top insurance companies and Jerry takes care of the rest—securing your new policy and helping you cancel your old one upon request.
With an average annual savings of $887, Jerry can help you free up funds for the repairs your Subaru’s needs.