2019 Toyota Tacoma Bolt Pattern

Your source for 2019 Toyota Tacoma bolt pattern info—from stud size and offset to the tools you’ll need to measure for yourself.
Written by Kara Vanderbeek
Reviewed by Jaya Anandjit
The 2019 Toyota Tacoma bolt pattern is 6x5.5 or 6 on 5.5, meaning each wheel has six bolts forming a circle 5.5 inches in diameter. 
Swapping out your factory wheels for a set that’ll confidently tackle off-road terrain often comes with the territory of driving a Tacoma. But before upgrading your wheels, you’ll need to know your Toyota’s bolt pattern.
That’s where
Jerry
, the
car insurance
comparison app comes in. Not only can Jerry optimize your
Toyota Tacoma insurance cost
in under a minute, but we’ve also created this guide to everything you need to know about your vehicle’s bolt patterns. If you drive a 2019 Tacoma, we’ve got you covered. 
Are you getting ripped off on your car insurance? Find out in less than two minutes.
No long forms · No spam · No fees
Find insurance savings
4.7/5 Rating on App Store

2019 Toyota Tacoma bolt pattern

Let’s get right to it: the bolt pattern on a 2019 Toyota Tacoma is 6x5.5, or 6 on 5.5. In other words, there are 6 bolts set in a circle 5.5 inches in diameter. 
Every bolt pattern can be expressed using this formula:
# of bolts x diameter of the circle they form
If you’re looking to upgrade your wheels, your Tacoma’s bolt pattern isn’t the only important measurement to be aware of. You should also know your truck’s stud size, wheel offset, center bore measurement, and torque specifications: 
  • Factory wheel size: 15” to 17” 
  • Stud size: M12x 1.5 
  • Offset: -25 to 35  
  • Center bore: 106.1 mm
  • Wheel tightening torque: 113 Nm

How to measure your Toyota Tacoma’s bolt pattern

If you forget your bolt pattern specifications, it’s a good idea to know how to measure the pattern yourself. Luckily, a bolt pattern can be measured in a few quick steps. All you’ll need is a measuring tool (a ruler or measuring tape will work)!
Start by picking a bolt and measuring from the center of the lug hole to the center of the opposite lug hole. This will give you your diameter. Next, count the number of bolts on the wheel. Put both numbers together, and you’ve got your bolt pattern!
kemper logo
Rating
Jerry Rating
See rates
nationwide logo
Rating
Jerry Rating
See rates
progressive logo
Rating
Jerry Rating
See rates
travelers logo
Rating
Jerry Rating
See rates

How to optimize your Toyota’s insurance coverage

Upgrading your factory wheels to a bigger, better set will increase the value of your Tacoma. Unfortunately, with increased value comes an increase in your
Toyota car insurance cost
.  
Luckily, the car insurance comparison app
Jerry
can help you lower your rate! Jerry will shop around for affordable quotes from over 55 of the nation’s top brokers in just 45 seconds. Once you choose the best coverage at the best price, Jerry takes care of all the paperwork, making it easier than ever to switch policies. 
The best part? Jerry users save an average of $800 per year!
“When we added a new car to our family, we were shocked at how high our current insurer was going to hike our rates. We used
Jerry
for some comparison shopping and are now saving around $1000 a year. Thank you, Jerry!” —Darius P.
RECOMMENDED
Jerry automatically checks if you are paying the lowest price for your insurance, for free.
Instantly compare top insurance companies
No spam or unwanted phone calls · No long forms
What insurance do you want to compare?

FAQs

The bolt pattern on a 2019 Tacoma is 6x5.5—6 bolts in a 5.5-diameter circle.
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
Try GarageGuard™

Easiest way to compare and buy car insurance

√
No long forms
√
No spam or unwanted phone calls
√
Quotes from top insurance companies
Find insurance savings