A 2018 Chrysler 300 bolt pattern is 5.4.53, which means each wheel has five bolts and they make a circle that is 4.53 inches in diameter. In metric, this measurement is conveyed as 5x115, where the diameter is 115 millimeters.

The simplest way to customize a Chrysler 300 is to replace the wheels. Whether you’re interested in aesthetic improvement or performance enhancement, this modification is a great place to start. Before you can upgrade your rims, however, you’ll need to know your Chrysler’s bolt pattern.

Keep reading and let

Jerry

help you out. Jerry is a trusted brokerage app that can optimize your

car insurance

in under a minute. We’re also determined to make car ownership easier for all drivers, so we put together this guide to bolt patterns to make your modification hassle-free. If you need help finding lower

Chrysler 300 car insurance costs

after your upgrade is complete, we can help with that too!

Are you getting ripped off on your car insurance? Find out in less than two minutes.

No long forms · No spam · No fees

Find insurance savings

4.7/5 Rating on App Store

2018 Chrysler 300 bolt pattern

The lug pattern for all generations of the Chrysler 300, including the 2018 model, is 5x4.53 (inches) or 5x115 (millimeters). The first number represents how many bolt holes there are, and the second number is the diameter of the circle they form.

In every vehicle, the bolt pattern or lug pattern is expressed as:

# of bolts x diameter of the circle they form

A 5x4.53 lug pattern means that your Chrysler’s wheels have five lugs each, set in a circle 4.53 inches in diameter. This is a very common

Chrysler lug pattern

for many of the manufacturer's models.

In addition to the lug pattern, you will need to know some additional measurements. Don’t go to the auto shop yet! You will need your Chrysler’s stud size, wheel offset, center bore measurement, and torque specifications for proper tightening.

Here’s the info for a Chrysler 300:

Factory wheel size: 17”, 18”, or 21”

Stud size: M14 x 1.7 (14 mm thread with 1.7 mm pitch)

Offset: 35 to 42 mm

Center bore: 71.6 mm

Wheel tightening torque: 176 Nm

MORE:

How to choose and replace Chrysler 300 windshield wipers

How to measure your Chrysler 300’s bolt pattern

You can use the information above to swap out your Chrysler’s wheels. But you can also measure for yourself to confirm the 2018 Chrysler 300 bolt pattern. This is one DIY that’s well within the ability of all car owners!

To get started, you will need a ruler or a measuring tape. Remember that the lug pattern is a two-number format. The first number is the number of bolt holes—which you can find out by counting the bolts on the wheel. The second number is the diameter of the circle formed by the bolt holes.

Pick any bolt and measure from the outer edge of the lug hole to the center of the opposite bolt. Your Chrysler has an odd number of bolts, so you cannot measure straight across. Instead, pick either of the nearest bolts and measure to the center. This measurement is your diameter, the second number in the bolt pattern.

You’re all set! Bring this measurement to your auto shop.

MORE:

12 cheap and easy car mods

How to optimize your Chrysler’s insurance coverage

Upgrading your vehicle is fun, there’s no doubt about it. We know that updating your car insurance is, well, less fun. But it’s imperative to keep your Chrysler coverage up to date and at a cost that works with your budget.

Use the free

Jerry

app to compare rates fast to get the absolute lowest rate with the best coverage for your

Chrysler car insurnace

policy. Shopping for car insurance doesn’t have to be mysterious, confusing, or time-consuming. Get the power of technology on your side and save money easily with our

trustworthy insurance shopping super app

“
Jerry
saved me $80 a month! I have a Chrysler 300 and really wanted to lower my rates. And they did! I really recommend you give this a shot!” —Nick M.

RECOMMENDED