The 2015 Ford Fusion bolt pattern is 5x108 or 5x4.25, meaning each wheel has five bolts, and the bolt circle measurement is 108 or 4.25 inches.
The new Ford Fusion is stylish, sporty, and packed with features, making it a big hit among car shoppers. And for those looking to add a bit of customization to the popular family sedan, wheel changes are an easy way to do that. But before swapping out your rims, you’ll need to know your Fusion’s bolt pattern.
If you’re ready to upgrade your wheels, we have all the information you’ll need about the 2015 Ford Fusion’s bolt pattern. Ready to get started?
2015 Ford Fusion bolt pattern
The bolt pattern for all second-generation Ford Fusion models (2013 and later), including the 2015 Ford Fusion, is 5x4.25, or 5 on 4.25. If you’re unfamiliar with bolt pattern jargon, don’t panic—we’ll get you in the know. Here’s a simple equation for the bolt pattern or lug pattern:
# of bolts x diameter of the circle they form
A 5x4.25 lug pattern on your 2015 Ford Fusion means that each of your vehicle’s wheels has five bolts set in a circle 4.25 inches in diameter. The diameter of a circle is the length of a straight line drawn from two opposite points on the circle passing through the center. In this case, it would be from one bolt to another on the opposite side.
It’s also important to know your Ford’s
stud size, wheel offset, center bore measurement, and torque specifications before you check out new wheels: Factory wheel size: 16” or 17”
Wheel tightening torque: 135 Nm
How to measure your Ford Fusion’s bolt pattern
If you want to swap out your Ford’s wheels or rims for a spiffier set, the above information should be enough to get you started. But if you want to check for yourself to confirm, there’s a simple way to measure your 2015 Fusion’s bolt pattern.
All you will need is a measuring tape or ruler to get started. First, pick one of the bolts on the tire. Then, measure from the outside edge of the lug hole to the center of an adjacent bolt. Because the Fusion only has five bolts, you’ll end up between two bolts if you measure directly across, so you must pick one of the two bolts opposite your starting bolt.
That measurement is the second number in your bolt pattern expression (i.e., the diameter). Combine that with the number of bolts (the first number), and you have the bolt pattern for your Ford Fusion! Pretty simple, right?
“Jerry
had a super simple app that was easy to navigate. And their terrific customer service made everything even easier. Plus I saved $700 in a single year.” —Lucia M.
FAQ
The bolt pattern on a 2015 Ford Fusion is 5x4.25—five bolts on each wheel in a 4.25-inch-diameter circle.