2013 Honda CR-V Hood Release
The hood release on the 2013 Honda CR-V can be found near the brake pedal on the lower left side wall of the driver’s side cabin. Here’s how it works.
Written by Abbey Orzech
Reviewed by Melanie Reiff
The 2013 Honda CR-V hood release can be found in the driver’s side cabin, near the floor on the left side. Pull this lever first, then go around to the front of your vehicle and release the hood safety latch by pushing up and to the right on the lever found under the lip of the hood.
If you own a car, the chances are you’ll need to know how to open the hood at some point. Whether you’re DIYing your 2013 Honda CR-V’s oil change or you’re refilling fluids, being familiar with how to open your car’s hood will make whatever work you have that much easier.
We have the step-by-step process of how the 2013 Honda CR-V hood release works below, including what to do if it doesn’t work and how much a repair would cost. Let’s get started.
Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds
Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds
4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars4.7/5 app rating | Trusted by 5M+ driversWhere is the hood release on a 2013 Honda CR-V?
The hood release on a 2013 Honda CR-V is located in the lower left side of the driver’s seat cabin and near the brake pedal.
Be sure not to confuse the fuel door release with the hood release since they’re so close to each other! You’ll be able to tell which is which by the images depicted on them: the fuel door lever has a picture of a gas pump and the hood release lever has a picture of a car with an open hood. Pull that toward you to pop the hood open.
Now, you’ll notice the hood doesn’t come up all the way. There’s a second lever you’ll need to release before that step, so head to the front of your vehicle and slide your hand under the slightly ajar hood until you feel the safety latch.
How to open the hood on a 2013 Honda CR-V
Got the locations of the hood release levers down? Follow these steps to open the hood of your 2013 Honda CR-V:
- Pull the hood release lever found inside the vehicle and listen for the hood to pop open.
- Go to the front of your CR-V and feel under the lip of the hood for the safety latch. It should be near the center of the hood.
- Press up and to the right on the safety latch to release the hood all the way.
- Insert the prop rod found under the hood into the notch on the underside of the hood cover to keep it propped open.
Once the hood cover is secure in place, feel free to get to work! If you’re still stuck on step one, keep reading.
MORE:
What if the hood release latch doesn’t work?
The hood release latch of your 2013 Honda CR-V should allow the hood cover to pop up so you have access to the safety latch. If the release lever or latch is malfunctioning or damaged, the hood will not be able to pop up unless you release it manually—which you can do with a flathead screwdriver and a flashlight!
Use your flashlight to illuminate what’s going on behind your CR-V’s front grille, right over the Honda insignia. Look for the hood latch cable that’s attached to the right side of the release lever. Once you find it, stick your flathead screwdriver directly under it and press up to get the latch to release. After the hood pops up, release the safety latch like normal.
How to repair the 2013 Honda CR-V hood release
While it’s handy to know the screwdriver trick, you’ll want to get your hood release repaired as soon as possible. The repair or replacement for a hood release latch or cable can be a little tricky, so it may be best to schedule a servicing appointment at your local Honda dealer or trusted local mechanic.
In general, you can expect to pay between $150 to $200 for the repair or replacement bill depending on where you go to get it done. The Honda dealership will be using Honda OEM parts and specialty Honda-trained labor, so this option will be the priciest. If you’re willing to use aftermarket parts and not Honda-specific labor, your local certified mechanic should be cheaper.
Or you can check your
car insurance
policy! If you have OEM coverage
and you’re working with a broken OEM Honda part, the repair should be covered. Collision coverage
would come in handy if the hood release was damaged during an auto accident. "This app is all about savings!Jerryjust saved me $193/month on my car insurance. They literally found me the cheapest policies out there and with better coverage! Seriously, just sit back and watch Jerry work its magic.” —Rachel B.
Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs
* checking your rate won’t affect your credit score
Get ahead of my car maintenance
* checking your rate won’t affect your credit score
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
4.7You might also be interested
We value your privacy
