2011 Toyota Rav4 Engine Oil Capacity

Jerry has your guide with everything you need to know about the 2011 Toyota Rav4’s oil capacity.
Written by Bonnie Stinson
Reviewed by Melanie Reiff
The
Toyota Rav4
appeals to the outdoor adventurer in all of us with its rugged good looks and impressive handling. Regardless of if you’re taking your Rav4 down back roads or just on your morning commute, knowing your engine’s oil capacity can help you keep your SUV in top shape.
You can keep your vehicle performing well and save you some money if you choose to DIY some of your vehicle’s routine maintenance. A good place to start is changing your own oil—it is relatively easy, all you need to know is your 4Runner’s oil capacity and the type of oil you need.
If the idea of changing your oil is a little daunting, don’t worry!
Jerry
, the
super app
for car owners, is here to help. We’ve got your guide to your 2011 Toyota 4Runner and we can save you some money on your
car insurance
while we’re at it. Let’s get started!
Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs
* checking your rate won’t affect your credit score
Get ahead of my car maintenance
* checking your rate won’t affect your credit score

2011 Toyota Rav4 engine oil capacity

Your first step to changing your oil will be purchasing new engine oil—but how much do you need for your 2011 Toyota Rav4?
The 2011 Toyota Rav4 2.5 L 4-Cyclinder has an oil capacity of 4.7 quarts or 4.4 liters and the 3.5 L V6 has an oil capacity of 6.4 quarts or 6.1 liters. Engine oil is typically sold in 1-quart or 5-quart bottles, so you’ll have to buy 5 quarts of oil at a time. You’ll have a little left over, but you don’t want to only fill your oil reservoir part-way—this could cause some serious engine damage. 

What kind of oil does a 2011 Toyota Rav4 need?

You’ll also need to buy the right kind of engine oil. There are lots of different varieties, but not all of them will be best for your Rav4. Toyota recommends using a full synthetic or synthetic blend of 0W-20 engine oil for the 2011 Rav4 2.5 L 4-Cylinder while recommending SAE 5W-30 for the 3.5L V6. 
Don’t take the manufacturer's recommendation lightly—using a different oil can decrease your engine performance and you could void your warranty if it causes engine damage!
Full synthetic and synthetic blend oils use conventional oil and mix it with different ingredients and additives to enhance your vehicle’s performance and provide better protection against rust, corrosion, and general wear and tear.
The numbers indicate the oil’s viscosity grade—or how well it performs at extreme temperatures on a scale from 0 to 50. A 0W oil will perform at the most extreme cold temperatures, while the 20 means it does pretty well in the heat, but not as well as a 40 or 50-weight oil.

How often to change oil on a 2011 Toyota Rav4

Not sure when you last had an oil change? Toyota recommends changing your oil every 3,000 to 5,000 miles if you’re using conventional motor oil. However, if you get full synthetic or synthetic blend engine oil, you can wait a little longer in between changes—typically between 7,000 and 10,000 miles as long as you check your oil levels regularly.
Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds
Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds
icon4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars
icon4.7/5 app rating | Trusted by 5M+ drivers
If your oil needs to be changed sooner, you may notice any of these indicators that it’s time for an oil change:
  • Motor oil that needs changing is dark brown or black (Clean oil is light brown or amber, like a cup of tea. Dirty oil is like a cup of soda)
  • Motor oil feels coarse or gritty
  • Any burning, smokey, or oil smells
  • Any changes in your vehicle’s performance

How to change your oil and oil filter

Now that you’ve purchased five quarts of 0W-20 oil and you have a replacement filter, it’s time to assemble your tools and change your oil. You’ll need a socket wrench, a drain pan, and a filter wrench.
Start your vehicle’s engine and let it run for a few minutes until your engine heats up to regular operating temperature. This will warm your oil so it will drain faster. Once your engine is warm, turn off your vehicle and open the hood.
  • Remove the oil fill cap
  • Position your drain pan underneath your vehicle then remove the oil drain bolt. Let the old oil drain out into the pan, but don’t move the pan yet!
  • Remove the old
    oil filter
    . At this point, more oil may leak out into the pan. Wait until it stops draining before moving on
  • Install the new filter
  • Replace the oil drain bolt 
  • Refill the engine with your new oil
  • Replace the fill cap 
  • Start the engine again and let the new oil cycle for a few minutes
  • Pour the dirty engine oil into a sealed container
After changing your oil, it’s a good idea to turn on your car and let your engine run for about 30 seconds before you check the oil level. This will give you a more accurate measurement, and you’ll be able to top it off if necessary.
You don’t want to dump your old engine oil or throw it away in your trash can. You’ll need to take it to a recycling facility so it can be disposed of properly.

Don’t forget regular insurance policy maintenance

Keeping up with a regular maintenance schedule for your vehicle is crucial to keeping it running at top condition, but doing some routine maintenance on your
car insurance
policy is just as important. That’s where
Jerry
comes in.
When you download the Jerry app, not only can you compare rates on the coverage you need from the nation’s top providers, but you can choose a rate that fits your budget which saves you money ($800+ a year, on average!). 
And once Jerry’s customer support team helps you get your policy switched, we’ll handle all the maintenance—regularly checking your rates to make sure you’re still getting the best deal. 
"After using
Jerry
twice, I can confidently recommend them for insuring a new car or renewing for an existing car. Phenomenal service.” —Phil E.
RECOMMENDED
Thousands of customers saved on average $887/year on their car insurance with Jerry
This app is great, but the customer service is even better! Not to mention convenient! My husband and I got the lowest rate (much lower than the rates I was finding online through my own searches), quickly, and pretty much all through text message! Thank you so much for a hassle free experience👍
avatar
Gabriella R.
Find insurance savings
rating primary
4.7/5 Rating on App Store
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
Try GarageGuard™

Easiest way to compare and buy car insurance

√
No long forms
√
No spam or unwanted phone calls
√
Quotes from top insurance companies
Find insurance savings