2010 Mazda 3s Engine Oil Capacity

Doing a DIY oil change on your Mazda? From the 2010 Mazda 3s oil capacity to the type of oil to buy and some simple steps, here's what you need to know.
Written by Annette Maxon
Reviewed by Melanie Reiff
Changing your car’s oil from home is simple as long as you have the right tools, know the oil capacity of a 2010 Mazda 3s, and how frequently you need an oil change. 
Oil changes are one of the necessary parts of being a car owner but tend to come at a sky-high cost. Some Mazda 3s owners may not know that changing their car’s oil can quickly be done at home, saving you from paying all those pricey oil maintenance bills!
Fortunately,
Jerry
is all about saving money on car expenses. That’s why the top-rated super app for
car insurance
created this guide that covers everything you need to know about the 2010 Mazda 3s engine oil capacity, oil type, and the necessary tools for a successful oil change. Plus, we'll give you some tips to help lower your
Mazda 3 insurance costs

2010 Mazda 3s engine oil capacity

If you haven't changed your oil before, you're probably wondering, what is the engine oil capacity for a 2010 Mazda 3s?
The 2010 Mazda 3s has a 2.5-liter 4-cylinder engine with an oil capacity of 5.3-quarts or 5 liters
When talking about the engine oil capacity, it’s important not to confuse it with the engine displacement, which is indicated by the engine code’s volume number. Essentially, the engine displacement is the volume the cylinders take up in the engine, and the engine oil capacity is the amount of oil needed for each oil change
In the case of the 2010 Mazda 3s, you have an engine displacement of 2.5-liters, which is very different from the 5.3-quart oil capacity.
MORE: How much should an oil change cost?

What kind of oil does a 2010 Mazda 3s need?

Now that you know the engine oil capacity for a 2010 Mazda 3s, it’s time to pick out the oil for your car! Mazda recommends using 5W-20 genuine motor oil in the 3s model. 
If you’re wondering what this oil code means, let’s take a closer look—the numbers five and 20 indicate the lowest and highest temperatures in which the oil retains its viscosity. In this case, the oil is fluid and usable at 0°F and up to 212°F. The W simply stands for “winter.” So, you can buy this oil knowing it is stable in everything from cold-weather conditions to scorching temperatures. 
Why these ratings? Simply put, a 5W-20 oil protects your engine from excessive wear and tear. In cold weather conditions, when your car is already working hard, this grade ensures that the oil remains fluid, and protects your engine. 
The owner’s manual for the 2010 Mazda 3s states that any 5W-20 oil is acceptable, making both genuine and premium-grade synthetic varieties fair game
  • Owner's manual recommendation: Mazda Genuine 5W-20 Oil
Are you overpaying for your car insurance?
Compare quotes and find out in 45 seconds.
No spam or unwanted phone calls · No long forms
No spam or unwanted phone calls · No long forms · No fees
icon4.717k Ratings
5M+Drivers Joined
7M+Cars Garaged

How often to change the oil on a 2010 Mazda 3s

Now you know the type of oil to use in a 2010 Mazda 2s 2.5-liter engine, but how often does it need to be changed? Opinions can vary, so the best route is to follow the manufacturer’s recommendation.
Mazda recommends changing the oil in a 3s every 7,500 to 10,000 miles. Checking the oil level every other refuel is the best way to stay on top of this critical maintenance task. 
Even if you check the oil levels regularly, dirty engine oil can sneak up unexpectedly. These are some of the indicators that your oil is overdue for maintenance:
  • Odd sounds coming from the engine
  • New smells, especially if they smell like burning, oil, or smoke 
  • Decline or other changes in performance
  • Black and gritty engine oil
    —clean oil is translucent and amber-colored
Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds
Compare insurance quotes from 50+ carriers with Jerry in under 45 seconds
icon4.7/5 rating on the App Store | Trusted by 5+ million customers and 7 million cars
icon4.7/5 app rating | Trusted by 5M+ drivers

How to change your oil and oil filter

When it is finally time to change the oil in a 2010 Mazda 3s, you can save money by doing this task at home. 
Before getting started, gather the
car tools and supplies
you’ll need—a socket wrench, drain pan, filter wrench (specifically designed to remove the oil filter), replacement filter, and enough 5W-20 oil to fill your Mazda 3s’s engine. 
Start by turning the engine on and running it for approximately five minutes to warm it to normal operating temperature. It may take longer than five minutes to reach this ideal temperature if it’s freezing outside. Once it’s sufficiently warmed up, turn the engine off and open the hood
Then, follow these steps to change the oil:
  • Unscrew and remove the oil fill cap
  • Next, crawl beneath the car to access the drain bolt on the bottom side of the engine and position the drain pan directly beneath the drain
  • With the drain pan in place, grab your socket wrench to unscrew the drain bolt and washer—let the old oil drain out of the engine and into the pan
  • Using the filter wrench, remove the old oil filter and let the oil continue to drain
  • Once the old oil is completely drained from the engine, install the new oil filter
  • Return the drain bolt to its spot and use a new washer to tighten the bolt to 29 lb-ft
  • Crawl out from under the car to access the oil fill opening—fill the engine with 5.3-quarts of oil
  • Use the dipstick to check the engine oil level 
  • Once you’ve filled to the engine’s maximum oil capacity, screw the fill cap back into place
After changing your oil, it’s a good idea to turn on your car and let your engine run for about 30 seconds before you check the oil level. This will give you a more accurate measurement, and you’ll be able to top it off if necessary.
Finally, test your handy work by turning the engine on and letting it run for a few minutes. You’re watching for leaks and confirming the oil pressure light on the dashboard. If you spot a leak, the filter or bolts may have been installed incorrectly. You’ll want to ensure this is fixed before hitting the road!
When you’re ready to clean up, pour the dirty oil into a sealable container and deliver it to a local recycling center. Never dump the old oil on the group or in the garbage bin—no matter how old, engine oil is highly toxic and flammable.

Don’t forget regular insurance policy maintenance

Car maintenance may be a major headache for some car owners. Not only are there many pieces to keep tabs on, but the price adds up quickly. Fortunately,
Jerry
offers a fast and easy way to keep money in your pocket. 
All you need to do is download Jerry from the app store, fill out three pieces of basic info, and let the
trustworthy super app
take it from there. Not only does it find you policies customized to your needs and budget, but it also ensures you have the best coverage every time your policy comes up for renewal. 
Not only can you save on average $800+ on annual insurance costs, but you never need to shop for car insurance again!
Jerry
found me a Progressive insurance policy that saves me $55/month compared to my previous plan. I would recommend Jerry to anyone to double-check that you’re getting the best rate.” —Sonya J.
Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs
* checking your rate won’t affect your credit score
Get ahead of my car maintenance
* checking your rate won’t affect your credit score
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
Try GarageGuard™

Easiest way to compare and buy car insurance

√
No long forms
√
No spam or unwanted phone calls
√
Quotes from top insurance companies
Find insurance savings