2010 Ford Fusion 2.5L Engine Oil Capacity

The 2010 Ford Fusion 2.5L engine has an oil capacity of 5.3 quarts.
Written by Melanie Krieps Mergen
Reviewed by Melanie Reiff
The 2010 Ford Fusion 2.5L has a lot to offer, from its roomy trunk and cabin space to the great safety ratings. But to keep reaping those benefits for years to come, it might help to know its engine oil capacity.
If you’re planning to change your 2010 Ford Fusion’s oil at home, you’re going to need to know its engine oil capacity, as well as its required oil type to get the job done right.
For your convenience,
Jerry
, the
car insurance
broker app, has gathered up these details, plus more oil change tips—and even better, how you can cut down on
Ford Fusion car insurance costs
.
Let Jerry find your price in only 45 seconds
No spam · No long forms · No fees
Find insurance savings

2010 Ford Fusion 2.5L engine oil capacity

Even within the same make and model year, some vehicles can come with different engine options, and that’s the case with the 2010 Ford Fusion.
If you don’t know what your 2010 Ford Fusion’s engine type is, there are a few different places you could check to find out:
  • Your owner’s manual
  • The label on your driver’s side door jamb
  • Information on the engine itself
  • Your vehicle purchase or registration papers
If you have a 2010 Ford Fusion with a 2.5-liter engine, it has an oil capacity of 5.3 quarts, or 5 liters.
Be careful not to mistake the “2.5 liters” here for your oil capacity—this is actually your engine displacement, or the total volume of your engine cylinders. It doesn’t have anything to do with oil capacity.

What kind of oil does a 2010 Ford Fusion 2.5L engine need?

Not only will you need to know your engine oil capacity—you’ll also need to know its required oil type. Using the wrong kind of engine oil for your vehicle could cause serious damage to your engine or other parts.
Your 2010 Ford Fusion owner’s manual states that your vehicle requires synthetic blend or full synthetic5W-20 engine oil.
The “5” here refers to your engine oil’s viscosity or thickness at colder temperatures before you’ve started your engine. The “20” refers to its viscosity once your engine has reached normal operating temperatures.
As you evaluate your engine oil options, here are a few to consider: 
  • Ford’s first pick: As a first choice, Ford recommends using
    Motorcraft engine oil
    with the correct specifications.
  • For high-mileage vehicles:If your Ford Fusion has really gone that extra mile (above 75,000 miles), a high-mileage engine oil like
    this option
    from STP could help improve performance and provide added protection.
  • A full synthetic option: For enhanced performance, consider a full synthetic engine oil like
    this option
    from Valvoline.
Jerry sends free alerts to keep your car up-to-date so you can avoid costly repairs
* checking your rate won’t affect your credit score
Get ahead of my car maintenance
* checking your rate won’t affect your credit score

How often to change the oil on a 2010 Ford Fusion 2.5L engine

Knowing your oil capacity and oil type is a must—and so is knowing when to actually change it.
The 2010 Ford Fusion owner’s manual recommends changing your engine oil every 7,500 miles. If you’re not driving quite that often, at minimum, you’ll still want to aim to change your vehicle’s oil at least every six months to ensure it stays clear of buildup so it can circulate smoothly.
Another factor to consider: if you drive your Fusion under more taxing conditions, like idling in traffic for long periods of time or driving up and down steep mountain roads, you might need to change your engine oil even sooner.
That’s why it’s important to check your engine oil once a month
If it’s past time for your 2010 Ford Fusion to receive an oil change, you might notice some of the following signs:
  • Engine knocking or ticking sounds
  • Oil or burning scents coming from the engine
  • Oil level that’s too low
  • Excessive vibration while idling
  • Worsened engine performance
  • Engine oil that has darkened in color (fresh engine oil is light brown rather than black)
  • Engine oil that has a coarse texture, indicating a buildup of too much debris (which runs the risk of damaging your engine)

How to change your oil and oil filter

Taking care of that oil change yourself? The first thing you’ll need to do is make sure you have all the necessary materials at the ready.
Those supplies might include a socket wrench, an oil filter wrench, gloves, and a drain pan. Of course, you’ll also want to have that fresh 5W-20 engine oil, a new oil filter, and a new washer to use with your drain bolt as you near the end of the process. 
Using a funnel can make adding your new engine oil easier, and it’s always a good idea to have supplies like towels on hand for cleaning up. It may also help to raise your vehicle on jack stands—just be sure you’re aware of best safety practices before using them.
When you have all the necessary supplies, the following are the nine general steps involved with a typical oil change:
  • Step 1: Turn on your Ford Fusion’s engine just long enough to warm up the engine oil (this will help speed up the draining process)
  • Step 2:Turn off your engine
  • Step 3: Lift your hood, then locate and remove the motor oil filler cap
  • Step 4:Place your drain pan below the engine oil drain bolt
  • Step 5: Remove the engine oil drain bolt and washer and let the used oil drain into the pan
  • Step 6:Remove your old oil filter, then replace it with the new one
  • Step 7:When that oil draining is complete, you can put the oil drain bolt back into place (remember to use a new washer!)
  • Step 8:Back at the hood, add fresh engine oil to the correct level
  • Step 9: Replace the motor oil filler cap
Next, it’s time for a quality assurance check:
  • Look around for any potential oil leakage
  • Let your engine run a few minutes again to let the oil flow through the system and ensure it’s working properly
  • After the engine has cooled off, use your dipstick to check your engine oil fill level again and adjust as needed to make sure it’s right where it should be
  • Safely dispose of your used engine oil by taking it to a designated recycling location (don’t just dump it out in your yard or wash it down the drain!)
Once you’re finished, you’ll have one less car maintenance item to worry about! (At least, for the next several thousand miles.)

Remember regular insurance policy maintenance

In addition to oil changes, we know you have plenty of other car maintenance tasks to keep track of. That’s why the
Jerry
app has your
car insurance
policy maintenance covered.
Fortunately, with Jerry, insurance shopping is about as fast and hands-free as it gets. All you have to do on your end is answer a few basic questions, like the ideal coverage level you’re looking for. 
Then, in an instant, Jerry will find you personalized quotes from top insurance providers based on the answers you provide—that way, you can feel more confident that they’ll actually be a good fit. It also makes ensuring you don’t overpay for your
Ford car insurance costs
an effortless process.
With an average annual savings of more than $800 on car insurance alone, it’s easy to see why drivers have rated Jerry the #1 insurance app in the App Store!
Jerry
had a super simple app that was easy to navigate. And their terrific customer service made everything even easier. Plus I saved $700 in a single year.” —Lucia M.
RECOMMENDED
Jerry automatically checks if you are paying the lowest price for your insurance, for free.
Instantly compare top insurance companies
No spam or unwanted phone calls · No long forms
What insurance do you want to compare?
Estimate your repair costs for free with GarageGuard™
Simplify your car maintenance with Jerry.
Try GarageGuard™

Easiest way to compare and buy car insurance

√
No long forms
√
No spam or unwanted phone calls
√
Quotes from top insurance companies
Find insurance savings