The 2007 Toyota Camry has been one of the most popular cars on the road since its debut, and you’re bound to still see a bunch of them cruising around to this day. If your ‘Ol Reliable is still kicking, you should learn about its engine oil capacity to keep it running for years to come.
Maybe you don’t fancy yourself a car person—and that’s fine! We’re sure you fancy yourself someone who enjoys saving money, though, and we’ve got a way for you to do just that. If you wish to perform your own oil changes and save yourself a trip to the mechanic, you’ve come to the right place.
Jerry
is the car insurance
comparison super app here to assist you change the oil on your 2007 Toyota Camry and lower your Toyota Camry insurance costs
.2007 Toyota Camry engine oil capacity
Before you can dive under the car to start your oil change
, you need to know exactly how much oil your 2007 Camry will need. The Camry sports a 2.4-liter V6 engine with an oil capacity of 4.5 quarts. The 2.4-liter part refers to the engine’s displacement, and should not be confused with its oil capacity. To ensure you understand the distinction, let’s quickly go over what they mean.
Displacement is the total volume of air and fuel swept into a cylinder during one engine cycle, and oil capacity is how much oil the engine holds in order to keep it running smoothly.
What kind of oil does a 2007 Toyota Camry need?
When you go shopping there will be shelves upon shelves (or pages upon pages online) stocked with all sorts of different oil types—but you should look for Toyota Genuine SAE 0W-20 Full-Synthetic motor oil.
This is the oil that Toyota recommends, and it will keep your Camry running at optimal performance.
Let’s break down this oil type even further. The “W” stands for winter, and the 0 in front of it tells us that this blend will remain very thin even in cold temperatures, allowing it to flow quickly.
The 20 following the “W” denotes its grade of viscosity (thickness) while the engine is hot while running. Lastly, full-synthetic (as opposed to conventional oil) means that the oil is manufactured with chemical alterations and is not purely crude oil.
If you want to abide by Toyota’s recommendation, Genuine SAE 0W-20 Full-Synthetic Oil
is the way to go. If you are haveing a hard time finding 0W-20 oil, the owner's manual also states that SAE 5W-20 oil is an acceptable alternative motor oil in your vehicle. How often to change oil on a 2007 Toyota Camry
Now that’s all out of the way, it’s finally time to change your oil!
According to Toyota's recommended maintenance schedule, you should change your 2007 Camry’s oil every 3,000 to 5,000 miles to preserve the engine’s life and performance. If you do not frequently drive, or keep your mileage to a minimum, you should still get your oil changed every six months to ensure the oil inside the engine is fresh.
Monitoring your oil level and taking note of when your last change was can be the difference between an extended lifespan and complete engine failure
. You can also keep an eye and ear out for these signs that your car is ready for an oil change: Gritty or rough textured oil
Strange noises coming from the engine
Burning or smoke odors coming from the engine
Car’s performance is noticeably different
How to change your oil and oil filter
Now that you’re ready to take the plunge, make sure you have these materials before getting started: jacks, a socket wrench, a drain pan, a filter wrench, a fresh filter, and a rag. And of course, don’t forget a five-quart bottle of 0W-20 Full-Synthetic motor oil.
Here are the steps to change your 2007 Camry’s oil:
Jack up your Camry so you can easily work underneath it
Locate the oil drain plug and place the drain pan below it
Remove the oil drain plug, allowing the oil to drain out
Use the filter wrench to unscrew the oil filter, and let any oil drip out of it
Wipe the filter surface clean with the rag and install the replacement filter
Tighten the oil plug back into place
Refill the engine with fresh oil and replace the fill cap
The oil change shouldn't take too long
, overall. Once you’re done, check the oil level with your dipstick to make sure you’ve poured in the proper amount, and make sure your oil pressure light
is off on your dashboard. After changing your oil, it’s a good idea to turn on your car and let your engine run for about 30 seconds before you check the oil level. This will give you a more accurate measurement, and you’ll be able to top it off if necessary.
For extra assurance, it’s a good idea to let your car run for a few minutes and confirm there are no leaks.
As for the cleanup—you should never dump your old contaminated oil on the ground or into your garbage bin. Instead, pour it into a sealable container and bring it to your local recycling center for proper disposal.
Don’t forget regular insurance policy maintenance
Skipping the repair shop and performing your own oil changes isn’t the only thing that can save you a lot of time and money—so can shopping for car insurance with Jerry
! Jerry is the trustworthy insurance shopping super app
designed with the customer in mind. Simply download the app, enter your current information, and Jerry will compare policies from over 50 top-name providers so you score the best quotes. You can forget about paperwork and phone calls with agents—Jerry will handle all of that so all you need to focus on are your newfound savings.
Jerry customers save an average of $880+ on insurance per year!
“Insurance companies originally charged me $189 while driving my BMW 300 miles per year. Thanks to Jerry
, I only pay $56! I’m so happy.” —Ray T.
4.717k Ratings 5M+Drivers Joined
7M+Cars Garaged